GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Emerson - GE Fanuc |
Product Type: | Automation Product |
Part Number: | IC694BEM321 |
Series: | RX3i PacSystem |
UPC: | 799705793460 |
Description:
This I/O connection interface is part of the RX3i PacSystems line of products. The key applications that this interface link module is designed to provide are a master processor in an I/O Link network with 16 slave devices. Because it has 1024 inputs and 1024 outputs that can be connected using the GE Fanuc proprietary network protocol I/O Link, this device is an excellent choice for users that require an extensible and simple setup serial network to control their industrial operations.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The IC694BEM321 is an I/O link interface module. It belongs to the RX3i PacSystem controller product family. This unit was designed and manufactured by Emerson - GE Fanuc. This link module is engineered to provide a master module in an input output link network. This network link form is a result of 16 connected I/O slave modules. It comes with a single slot. This single slot can be used in any vacant Series 90-30 PLC's backplane. Similarly, users can also insert it into the RX3i systems. It supports a universal backplane with 1024 input points and 1024 output points. This product can monitor the state of the inputs, and then it can send the responses to the independent outputs. This module also allows for the same GE Fanuc style installation method. It is easy to manage all in one. The compatible communication ports are RS-485 and RS-422. These network interfaces help establish a stable network configuration and enable regular communication. It features OK, ACTV, and CFG LEDs, which is a great feature that resembles and contains human machine interface attributes. Users should also note that it is compatible with RX3i PacSystems host CPUs. As far as its protective enclosure is concerned, this link interface module meets the criteria of an IP20 rating, which is suitable for use indoors. There is only one limitation for this unit: users can install it in a single network, and the same network must be capable of supplying all of the power that linked devices might need.
Question: Does Automation Stop offer repairs on the IC694BEM321?
Answer: Yes. We offer repairs for the IC694BEM321 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC694BEM321?
Answer: If you buy the IC694BEM321 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC694BEM321 online?
Answer: Yes. Automation Stop sells the IC694BEM321 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC694BEM321?
Answer: The IC694BEM321 is made by Emerson - GE Fanuc.
For additional information about IC694BEM321 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC694BEM321.
Revision Part # | Also Known As | Availability |
---|
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.