GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Emerson - GE Fanuc IC694ALG442

✓ In Stock

IC694ALG442 Image 1 thumbnail
IC694ALG442 Image 2 thumbnail
IC694ALG442 Image 3 thumbnail
IC694ALG442 Image 4 thumbnail
IC694ALG442 Image 5 thumbnail
IC694ALG442 Image 6 thumbnail
Manufacturer: Emerson - GE Fanuc
Product Type: Automation Product
Part Number: IC694ALG442
Series: RX3i PacSystem
UPC: 799705802377

Description:

The IC694ALG442 is an Analog Combination Voltage/Current Input/Output module manufactured by GE Fanuc for Rx3i PacSystems. The module provides two (2) single-ended output channels and four (4) different input channels.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The IC694ALG442 is an Analog Current/Voltage Input/Output module designed for Rx3i PacSystems. It provides four (4) different input channels and two (2) output channels. All the channels of the module can be configured through Machine Edition software in these ranges: unipolar (0 to +10), bipolar (-10 to +10), 0 to 20 milliamperes, and 4 to 20 milliamperes. The unipolar range 0 to +10 is the default setting for the system will be set automatically when installed unless it is changed manually. In higher modes, the input channels of the module can be configured to the range: 4 to 20 milliamperes. The module can be installed in any of the I/O slots in the Rx3i system. The users can configure various outputs of the module. If the power of the system is interrupted or is reset to the low end of the given series, the module reaches the Hold Last State. Using the applicable program, the outputs can be configured to run in ramp mode using the appropriate command. Also, high and low alarm ranges can be set for the input channels with an open wire fault.

The IC694ALG442 module is required to be connected with a 24 Volts DC power from an external source for use. If the module is used with the Rx3i Universal backplane, the external power source can be connected through the TB1 connector present at the left side of the backplane of the Rx3i system. You can also choose to connect the terminal block of the module directly. When using the backplane, the external power source should be connected to the module’s terminal block. The resolution is based on the output range or the configured input.

Technical Specifications

Voltage Range 0 to +10 Volts, -10 to +10 Volts
Current Range 0-20 milliamperes, 4-20 milliamperes
Update Rate 8 millisecond In / 4 millisecond Out
Output Load 5 milliamperes maximum
Number of Channels 4 In/2 Out
Power Consumption 95 milliamperes at +5 Volts DC, 129 milliamperes at + 24 Volts DC isolated
Analog Outputs 2, Single-Ended
Output Loading 5 milliamperes (2 K Ohms minimum resistance)
Output Load Capacitance 2000 pF (minimum)
Output Load Inductance 1 H (maximum)
Common Mode Voltage 200 Volts DC (maximum)
Input Filter Response 29 Hertz
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the IC694ALG442?

Answer: Yes. We offer repairs for the IC694ALG442 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Emerson - GE Fanuc and IC694ALG442?

Answer: If you buy the IC694ALG442 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the IC694ALG442 online?

Answer: Yes. Automation Stop sells the IC694ALG442 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the IC694ALG442?

Answer: The IC694ALG442 is made by Emerson - GE Fanuc.


Question: What is the Analog Outputs of the IC694ALG442?

Answer: The Analog Outputs of the IC694ALG442 is 2, Single-Ended.


Question: What Common Mode Voltage does the Rockwell-Automation IC694ALG442 have?

Answer: The IC694ALG442 has a Common Mode Voltage of 200 Volts DC (direct current) (maximum).


Question: What Current Range does the IC694ALG442 have?

Answer: The IC694ALG442 has a Current Range of 0-20 milliamperes, 4-20 milliamperes.


Question: What is the Input Filter Response of the IC694ALG442?

Answer: The IC694ALG442 has a Input Filter Response of 29 Hertz.


Question: What Number of Channels does the IC694ALG442 have?

Answer: The Allen Bradley IC694ALG442 has a Number of Channels of 4 In/2 Out.


Question: What Output Load does the Allen Bradley-Rockwell Automation IC694ALG442 have?

Answer: The IC694ALG442 has a Output Load of 5 milliamperes maximum.


Question: What Output Load Capacitance does the IC694ALG442 have?

Answer: The IC694ALG442 has a Output Load Capacitance of 2000 pF (minimum).


Question: What is the Output Load Inductance of the Allen Bradley/Rockwell Automation IC694ALG442?

Answer: The IC694ALG442 has a Output Load Inductance of 1 H (maximum).


Question: What is the Output Loading of the Allen Bradley IC694ALG442?

Answer: The Output Loading of the IC694ALG442 is 5 milliamperes (2 K Ohms minimum resistance).


Question: What is the Power Consumption of the IC694ALG442?

Answer: The Power Consumption of the Allen Bradley-Rockwell Automation IC694ALG442 is 95 milliamperes at +5 Volts direct current (DC), 129 milliamperes at + 24 Volts direct current (DC) isolated.


Question: What Update Rate does the Allen Bradley Automation IC694ALG442 have?

Answer: The Allen Bradley Automation IC694ALG442 has a Update Rate of 8 millisecond In / 4 millisecond Out.


Question: What is the Voltage Range of the IC694ALG442?

Answer: The Voltage Range of the IC694ALG442 is 0 to +10 Volts, -10 to +10 Volts.


Series information for IC694ALG442

For additional information about IC694ALG442 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC694ALG442.

Revision Part # Also Known As Availability
IC694ALG442-ED IC694ALG442 Series ED, Rev ED Request a Quote

Common Misspellings:

  • IC694AL6442
  • ICG94ALG442
  • ICG94AL6442
  • 1C694ALG442
  • 1C694AL6442
  • 1CG94ALG442
  • 1CG94AL6442

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP