GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Emerson - GE Fanuc |
Product Type: | Automation Product |
Part Number: | ST-3544 |
Series: | RSTi PacSystem |
UPC: | 799705804784 |
Description:
The ST-3544 from GE Fanuc is a four-channel RSTi analog input module. It has an analog input count of -10 to +10V and a type 4 point of -10 to +10V. At 5 volts DC, this system has a rated current consumption of 170 milliamperes. This input module also has Ethernet-based slice I/O, which provides high performance and flexibility, compact, distributed I/O, which provides long-life, and is simple to configure, manage, and upgrade.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The GE Fanuc designed ST-3544 is a 4-channel analog input unit, which is a PACSystems RSTI distributed system analog input module. This component is part of the GE Intelligent Platforms RSTi range and is intended to offer an industrial automation platform with long operational life, high levels of performance, and simple I/O options. The ST-3544 analog input module has four non-isolated single-ended inputs that can accept -10 to +10 volts DC signals. This ST-3544 analog input device features a color-coded identification tab on the front panel for simple module identification, as well as four individually numbered LEDs that display input statuses and one red/green RSTi bus status LED. This ST-3544 analog input module supports DIN rail attachment, and the module's "slide and lock" architecture makes it simple to place on a DIN rail.
Part number ST-3544 features four input channels that are single-ended and are not separated from one another. Every input circuit does have a maximum working rated power of -10 to 10 VDC and a data format of 16 bits (2's complement). The system supplies power for operation, and this module requires 170 milliamperes of the highest backplane current at 5 volts DC. This GE Fanuc module does not have built-in module diagnostics and does not need any further field calibration prior to use. Part number ST-3544 has a detachable terminal block for quick and simple installation. Each pinpoint is made out of a simple push and releases spring clamp termination that enables easy wiring without the need for any extra equipment. This GE Fanuc device weighs approximately seventy (70) grams.
Question: Does Automation Stop offer repairs on the ST-3544?
Answer: Yes. We offer repairs for the ST-3544 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and ST-3544?
Answer: If you buy the ST-3544 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the ST-3544 online?
Answer: Yes. Automation Stop sells the ST-3544 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the ST-3544?
Answer: The ST-3544 is made by Emerson - GE Fanuc.
For additional information about ST-3544 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding ST-3544.
Revision Part # | Also Known As | Availability |
---|
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.