GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Emerson - GE Fanuc |
Product Type: | Automation Product |
Part Number: | ST-3214 |
Series: | RSTi PacSystem |
UPC: | 799705804715 |
Description:
Designed and manufactured by the company known as Allen Bradley / Rockwell Automation, product number ST-3214 is an analog input module. This device has 4 single-ended input channels that are non-isolated between the channels. This module has an input current range of 4 to 20 milliamperes. The rated power dissipation is a maximum of 165 milliamperes at 5.0 volts DC. This Allen Bradley module weighs approximately 70 grams. It has physical dimensions that measure 12 mm x 99 mm x 70 mm.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
This module, which has the catalog number ST-3214, is an analog input module. This GE Fanuc module has an input current that is rated at four (4) to twenty (20) milliamperes, and it also has an input resolution of twelve (12) bits. Aside from that, this module includes four (4) single-ended input channels along with four (4) red or green system status indicators, and one (1) red or green module status indicator. The unit by GE Fanuc also has a sixteen (16) bit integer data format. The GE Fanuc ST-3214 analog input module is equipped with enhanced diagnostics and a four (4) point low-density input setup, which has the capability to be expanded to a sixteen (16) point high-density input setup. In addition to that, this module by GE Fanuc is equipped with an RSTi PacSystem network interface. This network interface can accommodate up to thirty-two (32) slice output and input modules. This device even includes test points that are integrated and are on the terminal block to facilitate troubleshooting. The power dissipation rating of this analog input module is 165 milliamperes maximum at 5.0 volts direct current (DC). This module has an approximate weight of seventy (70) grams. Additionally, this module has physical dimensions that measure 12 mm x 99 mm x 70 mm. This device should be operated in an environment where the temperature ranges from 0 degrees Celsius to 60 degrees Celsius. Additionally, this device should be stored in an area where the temperature ranges from -40 degrees Celsius to 85 degrees Celsius.
Question: Does Automation Stop offer repairs on the ST-3214?
Answer: Yes. We offer repairs for the ST-3214 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and ST-3214?
Answer: If you buy the ST-3214 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the ST-3214 online?
Answer: Yes. Automation Stop sells the ST-3214 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the ST-3214?
Answer: The ST-3214 is made by Emerson - GE Fanuc.
For additional information about ST-3214 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding ST-3214.
Revision Part # | Also Known As | Availability |
---|
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.