GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Emerson - GE Fanuc |
Product Type: | Automation Product |
Part Number: | ST-2744 |
Series: | RSTi PacSystem |
UPC: | 799705804654 |
Description:
This GE Fanuc output unit, which has the part number ST 2744, comes with distributed I/O networks and a granular design. This module by helps in reducing the overall set up cost which includes wiring, installation and per point cost. In addition to that, users also get reduced downtime and detection of any network errors with this GE Fanuc unit. This RSTI low density digital unit incorporates a 230 volts AC voltage.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The ST2744 is an RSTi digital output module manufactured by GE Fanuc. This is a four (4) point low density module that consists of a voltage rating of two hundred and thirty (230) volts alternating current (AC) or twenty-four (24) volts direct current (DC). This module by GE Fanuc offers the users faster control and a high level of performance when compared to the traditional bus fields. With the advanced and innovative diagnostics functionality, it aids in significantly reducing downtime through RSTi and controller diagnostics by easily, and adeptly, detecting any I/O or network errors. The device contains a granular design and distributed I/O networks. These aspects not only aid in bringing down the wiring and installation cost, but they also aid in reducing the overall cost per point. In addition to that, this module also incorporates a simplified design for expansion that is performed without impacting the wire along with a simplified system which allows for a lowered machine commission by cutting down on the removal and reassemble time. Moreover, this module by GE Fanuc incorporates an innovative locking functionality that enables the module to be perfectly fitted on the DIN rail. In addition to that, this GE Fanuc unit also incorporates an inbuilt slide and lock mechanism for a secured the device to device connection. Furthermore, the ST-2744 output device incorporates a removable terminal block that allows for it to be easily installed and maintained. In addition to that, on the terminal block, there are also additional test points that enable seamless troubleshooting.
Question: Does Automation Stop offer repairs on the ST-2744?
Answer: Yes. We offer repairs for the ST-2744 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and ST-2744?
Answer: If you buy the ST-2744 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the ST-2744 online?
Answer: Yes. Automation Stop sells the ST-2744 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the ST-2744?
Answer: The ST-2744 is made by Emerson - GE Fanuc.
Question: What voltage is included with the Emerson - GE Fanuc ST-2744?
Answer: The ST-2744 includes a voltage of 230.
Question: What amperage does the Emerson - GE Fanuc ST-2744 have?
Answer: The Emerson - GE Fanuc ST-2744 includes a amperage of 2.
For additional information about ST-2744 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding ST-2744.
Revision Part # | Also Known As | Availability |
---|---|---|
ST-2744-BA | ST-2744 Series BA, Rev BA | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.