GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Emerson - GE Fanuc |
Product Type: | Automation Product |
Part Number: | IC660EBA026 |
Series: | Genius I/O |
UPC: | 852571483498 |
Description:
The IC660EBA026 is made by GE Fanuc Automation, a current source input block with integrated electronics that runs between 24- and 48-Volts DC. Additionally, it accepts a power source voltage range of 18 to 56 Volts DC. The terminal assembly unit is used for wiring and connecting portable screens in the field. Additionally, the terminal assembly module maintains all block configuration settings in the EEPROM included inside the terminal assembly kit.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The IC660EBA026 is a current source input block with an integrated circuit. GE Fanuc Automation developed and created this input block. The electrical assembly for this input block contains all the parts essential for the block to work correctly, including all the electronics and other components involved in signal transmission. This inputs block measures approximately 22.44 centimeters in height, 8.89 centimeters in width, and 10 centimeters in depth. It weighs 1.8 kilos. This particular current source input block with electronics assembly has a maximum heat dissipation rating of 12 Watts and features eight switches, one of which is capable of performing BSM controls. The IC660EBA026 electronic assembly has sophisticated diagnostics capabilities such as low and high alarm reporting, over-and under-range recognition, open-wire identification, and internal fault reporting. Additionally, the terminal assembly maintains all block configuration information in the EEPROM included within the terminal assembly.
The GE Fanuc made IC660EBA026 current source input block-module with an electronics assembly has a 1-minute block-to-block isolation value of 1500 V. and a group-to-group isolation value of 1500 Volts RMS. This electronic assembly accepts a current source input block voltage of roughly 24 to 48 Volts DC. It operates between 18- and 56-volts direct current and can deliver a maximum current of 700 milliamperes. The IC660EBA026 current source input block by GE Fanuc Automation features a 100 Ohm input impedance, a 24 Volt DC open-circuit voltage rating, and a short-circuit current rating of fewer than 75 milliamperes. The assembly has a thermal drift of 25 ° C and must be connected to a terminal block assembly to complete the block components. The IC660EBA026 electronic assembly includes an open-type enclosure for easy enclosure installation. Additionally, it has a terminal assembly that speeds up wiring, and the electronic component may be removed/replaced without removing or altering field-side wiring.
Question: Does Automation Stop offer repairs on the IC660EBA026?
Answer: Yes. We offer repairs for the IC660EBA026 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC660EBA026?
Answer: If you buy the IC660EBA026 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC660EBA026 online?
Answer: Yes. Automation Stop sells the IC660EBA026 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC660EBA026?
Answer: The IC660EBA026 is made by Emerson - GE Fanuc.
For additional information about IC660EBA026 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC660EBA026.
Revision Part # | Also Known As | Availability |
---|---|---|
IC660EBA026K | IC660EBA026 Series K, Rev K | Request a Quote |
IC660EBA026L | IC660EBA026 Series L, Rev L | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.