GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Emerson - GE Fanuc |
Product Type: | Automation Product |
Part Number: | IC660BBA103 |
Series: | Genius I/O |
UPC: | 799705793514 |
Description:
The GE Fanuc Emerson IC660BBA103 is a thermocouple input block that provides six (6) input channels grouped into three (3) isolated groups which support either AC or DC power supply to control the temperature. The IC660BBA103 supports an input voltage of either 115 Volts AC or 125 Volts DC. The IC660BBA103 weighs approximately 1.8 kilograms (4 pounds) while shipping.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The GE Fanuc Emerson IC660BBA103 is a thermocouple input block that provides six (6) input channels grouped into three (3) isolated groups which support either AC or DC power supply with an input accuracy of 8 Hertz at 25 degrees Celsius (77 degrees Fahrenheit). The IC660BBA103 supports an input voltage of either 115 Volts AC or 125 Volts DC. The IC660BBA103 supports an input voltage range from 93 Volts AC to 132 Volts AC at a frequency range from 47 to 63 Hertz. The IC660BBA103 inputs support type N, T, S, E, J, K, B, and R thermocouples and can be set to either ± 100.0 degrees Celsius (212 degrees Fahrenheit) or ±100.0 degrees Fahrenheit to obtain a great accuracy. The IC660BBA103 supports both right-facing up and down installation employing either two bolt holes or screw.
The IC660BBA103 offers input low and high alarm detection and reports an internal fault. The IC660BBA103 can be installed in an enclosure to protect the internal circuitry by leaving an amount space of 5.08 centimeters (2 inches) from all orientations for heat dissipation. The IC660BBA103 channels support an internal, external sensor, or a user-defined value among ± 327.67 millivolts for CJC. The IC660BBA103 detects and offers automatically input over range, under range, and feedback diagnostics. The IC660BBA103 provides continuous electrical isolation of 1500 Volts AC/DC between blocks and 300 Volts AC/DC between groups. The IC660BBA103 dissipates an electrical power of 9 Watts. The IC660BBA103 has LED indicators for I/O block. The IC660BBA103 can be configured through the software. The IC660BBA103 weighs approximately 1.8 kilograms (4 pounds) while shipping and operates at zero (0) to 60 degrees Celsius (32 to 140 degrees Fahrenheit) for industrial applications.
Brand | GE Automation Fanuc / Emerson Automation |
Series | 115 VAC/125 VDC thermocouple input block |
Part Number | IC660BBA103 |
Rated Voltage | 115 VAC / 125 VDC |
Number of Points | 6 inputs |
Operating Voltage Range | 93 - 132 VAC / 105-145 VDC |
Input Interface | J, K, T, E, B, R, S and N thermocouples |
Input Measurement | Adjusted up to +/-100 deg C or F |
Voltage Measurement | -25.0mV to +150mV |
Accuracy (at 25°C) | 8 Hertz |
Block to Block Isolation | 1500 Volts for one minute |
Heat Dissipation | 9 Watts |
Group to Group Isolation | 300 Volts |
Frequency | AC: 47-63 Hz, DC: 10% maximum ripple |
Size (height x width x depth) | 8.83” (22.44 cm) x 3.34” (8.48 cm) x 3.91” (9.93 cm) |
Internal/External Cold Junction Measurement | 0°C to 60°C (32°F to 140°F) / -25.0°C to +150.0 °C |
Weight | 1.8 Kg (4 lb) |
Question: Does Automation Stop offer repairs on the IC660BBA103?
Answer: Yes. We offer repairs for the IC660BBA103 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC660BBA103?
Answer: If you buy the IC660BBA103 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC660BBA103 online?
Answer: Yes. Automation Stop sells the IC660BBA103 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC660BBA103?
Answer: The IC660BBA103 is made by Emerson - GE Fanuc.
Question: What is the Accuracy (at 25°C) of the IC660BBA103?
Answer: The Accuracy (at 25°C) of the Allen Bradley-Rockwell Automation IC660BBA103 is 8 Hertz.
Question: What Block to Block Isolation does the IC660BBA103 have?
Answer: The IC660BBA103 has a Block to Block Isolation of 1500 Volts for one minute.
Question: What Brand does the Allen-Bradley IC660BBA103 have?
Answer: The Allen-Bradley IC660BBA103 has a GE Automation Fanuc / Emerson Automation Brand.
Question: What is the Frequency of the IC660BBA103?
Answer: The Frequency of the IC660BBA103 is AC (alternating current): 47-63 Hz, DC (direct current): 10% maximum ripple.
Question: What is the Group to Group Isolation of the Rockwell Automation IC660BBA103?
Answer: The IC660BBA103 has a Group to Group Isolation of 300 Volts.
Question: What Heat Dissipation does the IC660BBA103 have?
Answer: The Allen-Bradley IC660BBA103 has a Heat Dissipation of 9 Watts.
Question: What Input Interface is included with the IC660BBA103?
Answer: The IC660BBA103 has a J, K, T, E, B, R, S and N thermocouples Input Interface.
Question: What is the Input Measurement of the IC660BBA103?
Answer: The IC660BBA103 has a Input Measurement of Adjusted up to +/-100 deg C or F.
Question: What Internal/External Cold Junction Measurement does the IC660BBA103 have?
Answer: The IC660BBA103 has a Internal/External Cold Junction Measurement of 0°C to 60°C (32°F to 140°F) / -25.0°C to +150.0 °C.
Question: What is the Number of Points of the IC660BBA103?
Answer: The IC660BBA103 has a Number of Points of 6 inputs.
Question: What is the Operating Voltage Range of the Rockwell Automation IC660BBA103?
Answer: The Operating Voltage Range of the Rockwell Automation IC660BBA103 is 93 - 132 voltage alternating current (VAC) / 105-145 VDC.
Question: What part Number does the Allen-Bradley IC660BBA103 have?
Answer: The IC660BBA103 has a component Number of IC660BBA103.
Question: What Rated Voltage does the Allen-Bradley IC660BBA103 have?
Answer: The Allen-Bradley IC660BBA103 has a Rated Voltage of 115 VAC (voltage alternating current) / 125 VDC.
Question: What is the Size (height x width x depth) of the IC660BBA103?
Answer: The Allen-Bradley IC660BBA103 has a Size (height x width x depth) of 8.83” (22.44 cm) x 3.34” (8.48 cm) x 3.91” (9.93 cm).
Question: What is the Voltage Measurement of the IC660BBA103?
Answer: The Voltage Measurement of the IC660BBA103 is -25.0mV to +150mV.
Question: What is the Weight of the IC660BBA103?
Answer: The Weight of the Allen Bradley/Rockwell Automation IC660BBA103 is 1.8 Kg (4 lb).
For additional information about IC660BBA103 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC660BBA103.
Revision Part # | Also Known As | Availability |
---|---|---|
IC660BBA103E | IC660BBA103 Series E, Rev E | Request a Quote |
IC660BBA103K | IC660BBA103 Series K, Rev K | Request a Quote |
IC660BBA103-RCC | IC660BBA103 Series RCC, Rev RCC | Request a Quote |
IC660BBA103-SCC | IC660BBA103 Series SCC, Rev SCC | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.