GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Emerson - GE Fanuc |
Product Type: | Automation Product |
Part Number: | IC600BF929 |
Series: | Series Six |
UPC: | 810111904308 |
Description:
Designed and manufactured by GE Fanuc, part number IC600BF929 is an output module that belongs to the Series Six line of products. This module has thirty-two (32) TTL outputs that are divided into four (4) equal groups. Additionally, this module has thirty-two (32) output status LEDs. This device requires an input voltage that is rated at 10 to 50 volts DC. The response time of this module to turn on and off is 40 microseconds.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number IC600BF929 is an output module by GE Fanuc. It is installed in an input / output rack or a Series Six Plus central processing unit (CPU) I/O slots. It offers a compact and isolated interface between the Transistor Transistor Logic (TTL) field digital circuitry and the backplane input / output bus. This high-density TTL module has 32 outputs. These active low outputs are divided into 4 equal groups. This module has 32 output status light-emitting diodes, or LEDs, to indicate the status of the corresponding output. This module comes with 2 jumpers. Jumper JP1 controls the response to a power outage or a Series Six system fault by disabling outputs (position 1-2) or holding the last state (Positions 2-3). Jumper JP2 allows the user to select the inverting or non-inverting mode for the module. There is an LED on the module corresponding to each jumper to indicate the selected mode of operation. This module requires an input power source that can supply 10 to 50 volts DC. This module behaves as a current state when it is in an ON state, and it can supply 500 milliamperes of current per output. This module has a response time of 40 microseconds maximum to turn on and off. When the module is in the off state, it has a maximum leakage of one (1) milliampere per output. This module has a faceplate that has dimensions measuring 12.46 inches x 1.175 inches. The circuit board of this module has dimensions that measure 8.15 inches x 11.0 inches.
Question: Does Automation Stop offer repairs on the IC600BF929?
Answer: Yes. We offer repairs for the IC600BF929 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC600BF929?
Answer: If you buy the IC600BF929 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC600BF929 online?
Answer: Yes. Automation Stop sells the IC600BF929 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC600BF929?
Answer: The IC600BF929 is made by Emerson - GE Fanuc.
For additional information about IC600BF929 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC600BF929.
Revision Part # | Also Known As | Availability |
---|---|---|
IC600BF929K | IC600BF929 Series K, Rev K | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.