GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Emerson - GE Fanuc |
Product Type: | Automation Product |
Part Number: | IC610MDL180 |
Series: | Series One |
UPC: | 636798907209 |
Description:
The GE Fanuc Emerson IC610MDL180 is a relay output module that includes eight outputs. The module outputs are grouped into two groups of four outputs. The IC610MDL180 weighs approximately 200 grams (0.44 pounds) while shipping.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The GE Fanuc Emerson IC610MDL180 is a relay output module that includes eight (8) output points that deliver a voltage rating range from 5 volts DC or AC to 265 volts DC or AC at a frequency range from 47 hertz to 63 hertz. The module outputs are grouped into two groups of four outputs that are labeled with green LED indicators to show the on/off status of outputs. Each group is protected by a 10 amperes replaceable fuse. The IC610MDL180 can be easily mounted in any input or output slot of the system. The output module provides an on response time of 5 milliseconds and an off response time of 5 milliseconds. The device can be employed for incandescent and inductive loads such as indicator lights, relay coils, motor starters, and solenoid valves. The wiring connections of this module are connected to screw terminals on a faceplate terminal block by employing either two 14 AWG wires or a single 12 AWG wire.
The IC610MDL180 draws a current of 45 milliamperes at a voltage of 9 volts DC. The module outputs deliver a current of 4 amperes per point. The IC610MDL180 supports an inrush current of 5 amperes and has a leakage current of 1 milliampere. This device operates at a frequency range from 47 hertz to 63 hertz. This unit supports a non-condensing relative humidity range from 5 percent to 95 percent and a vibration frequency range from 10 hertz to 500 hertz. The IC610MDL180 weighs approximately 200 grams (0.44 pounds) while shipping and operates at 0 degrees to 60 degrees Celsius (32 degrees to 140 degrees Fahrenheit) for industrial applications.
Brand | GE Automation Fanuc / Emerson Automation |
Series | Series One |
Part Number | IC610MDL180 |
Description | Relay output module |
Number of I/O points | 8 outputs |
Output groups | 2 with 4 circuits in each group |
Rated voltage | 6/240 VAC/VDC |
Output voltage range | 5 VDC/VAC to 265 VDC/VAC, 47 Hz to 63 Hz |
Fuses (Internal) | 2 x 10 amp replaceable (one on each group of 4) |
Output current | 4 amperes maximum per point (resistive) |
Inrush current | 5 amperes |
Output leakage current | 1 mA |
On/Off response time | 5 ms |
Internal power consumption | 45 mA maximum at 9 VDC |
Weight | 200 g (0.44 lb) |
Question: Does Automation Stop offer repairs on the IC610MDL180?
Answer: Yes. We offer repairs for the IC610MDL180 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC610MDL180?
Answer: If you buy the IC610MDL180 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC610MDL180 online?
Answer: Yes. Automation Stop sells the IC610MDL180 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC610MDL180?
Answer: The IC610MDL180 is made by Emerson - GE Fanuc.
Question: What Brand does the Rockwell-Automation IC610MDL180 have?
Answer: The Rockwell-Automation IC610MDL180 has a GE Automation Fanuc / Emerson Automation Brand.
Question: What Description does the IC610MDL180 have?
Answer: The Allen Bradley-Rockwell Automation IC610MDL180 has a Relay output module Description.
Question: What is the Fuses (Internal) of the Allen Bradley-Rockwell Automation IC610MDL180?
Answer: The Fuses (Internal) of the Allen Bradley-Rockwell Automation IC610MDL180 is 2 x 10 amp replaceable (one on each group of 4).
Question: What Inrush current does the Allen-Bradley IC610MDL180 have?
Answer: The Inrush current of the Allen-Bradley IC610MDL180 is 5 amperes.
Question: What is the Internal power consumption of the IC610MDL180?
Answer: The IC610MDL180 has a Internal power consumption of 45 mA maximum at 9 VDC.
Question: What Number of input/output points does the Allen Bradley IC610MDL180 have?
Answer: The Allen Bradley IC610MDL180 has a Number of input/output points of 8 outputs.
Question: What On/Off response time does the Allen Bradley-Rockwell Automation IC610MDL180 have?
Answer: The On/Off response time of the IC610MDL180 is 5 ms.
Question: What is the Output current of the Allen-Bradley IC610MDL180?
Answer: The Output current of the IC610MDL180 is 4 amperes maximum per point (resistive).
Question: What Output groups does the IC610MDL180 have?
Answer: The Output groups of the IC610MDL180 is 2 with 4 circuits in each group.
Question: What Output leakage current does the IC610MDL180 have?
Answer: The Output leakage current of the Allen Bradley/Rockwell Automation IC610MDL180 is 1 mA.
Question: What is the Output voltage range of the IC610MDL180?
Answer: The Rockwell Automation IC610MDL180 has a Output voltage range of 5 VDC/voltage alternating current (VAC) to 265 VDC/voltage alternating current (VAC), 47 Hz to 63 Hz.
Question: What is the unit Number of the IC610MDL180?
Answer: The Rockwell Automation IC610MDL180 has a part Number of IC610MDL180.
Question: What is the Rated voltage of the IC610MDL180?
Answer: The Rated voltage of the IC610MDL180 is 6/240 voltage alternating current (VAC)/VDC.
Question: What is the Weight of the IC610MDL180?
Answer: The IC610MDL180 has a Weight of 200 g (0.44 lb).
For additional information about IC610MDL180 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC610MDL180.
Revision Part # | Also Known As | Availability |
---|---|---|
IC610MDL180A | IC610MDL180 Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.