GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Emerson - GE Fanuc |
Product Type: | Automation Product |
Part Number: | IC610MDL104 |
Series: | Series One |
UPC: | 719485355115 |
Description:
The GE Fanuc IC610MDL104 is a sink in/relay out (4 in/4 out) I/O module designed to operate discrete loads such as motor starters, relay coils, and indicator lights. The module has a rated voltage of 24 volts DC, an input current of 18 milliamperes, and on/off input voltage levels from 0 to 3 volts DC and 18 to 36 volts DC, respectively. Its relay output circuits have a rated voltage of 5 to 265 volts AC/ DC, a frequency of 47 to 63 hertz, a current of 4 amperes maximum, and a maximum leakage current of 1 milliampere.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The GE Fanuc IC610MDL104 is an I/O module designed as a DC input/output relay device. The module operates at a rated voltage of 24 volts DC and is equipped with four (4) DC powered input circuits and four (4) relay output circuits. The inputs are designed to receive ON/OFF signals from a wide range of compatible devices. The module is equipped with embedded LED indicators with each input that display its current state. The relay outputs of the IC610MDL104 module are designed to control discrete loads, including relay coils, switches, motor starters, contactors, indicator lights, etc. This module operates on a maximum rated voltage which is 36 volts DC and has a maximum input current rating of 18 milliamperes. Its ON/OFF input voltage levels are rated from 0 to 3 volts DC and 18 to 36 volts DC, respectively. The module is built for a maximum off-state leakage equal to 3 milliamperes and has a maximum limit of on-state current of 7 milliamperes.
The IC610MDL104 module has four (4) built-in relay output circuits which operate within voltage limits of 5 to 265 volts AC/ DC, and it has an operational frequency range from 47 to 63 hertz. The relay module is designed to provide a 4-ampere maximum current at each output terminal, as well as a 1 milliampere maximum leakage. The net power consumption of the module is rated at 45 mA/9 volts for each circuit. The module is compact and convenient to use with an approximate weight of 0.67 pounds (0.3 kilograms) and measures 8.00 x 8.00 x 7.00 inches (203.2 x 203.2 x 177.8 mm).
Question: Does Automation Stop offer repairs on the IC610MDL104?
Answer: Yes. We offer repairs for the IC610MDL104 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC610MDL104?
Answer: If you buy the IC610MDL104 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC610MDL104 online?
Answer: Yes. Automation Stop sells the IC610MDL104 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC610MDL104?
Answer: The IC610MDL104 is made by Emerson - GE Fanuc.
For additional information about IC610MDL104 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC610MDL104.
Revision Part # | Also Known As | Availability |
---|---|---|
IC610MDL104A | IC610MDL104 Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.