GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Emerson - GE Fanuc IC670ALG320

✓ In Stock

IC670ALG320 Image 1 thumbnail
IC670ALG320 Image 2 thumbnail
IC670ALG320 Image 3 thumbnail
IC670ALG320 Image 4 thumbnail
IC670ALG320 Image 5 thumbnail
Manufacturer: Emerson - GE Fanuc
Product Type: Automation Product
Part Number: IC670ALG320
Series: Field Control
UPC: 799705793293

Description:

The GE Fanuc Emerson IC670ALG320 is an analog voltage/current output module. This module provides four output channels with a resolution of 12 bits. These outputs can be employed for either current or voltage output ranges. The IC670ALG320 weighs approximately 240 grams (0.53 pounds) while shipping.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Refurbished

$988.00

Available: 30

What is Refurbished

Your order will ship by . Need it faster?

Repair Service

$791.00

2-4 Weeks

What is Fast Repair

Repair Completion:
2-4 Weeks
Need it faster?

Looking for a IC670ALG320? We can help!

Request a Quote

Key Features:

  • operates at 0-10 volts for voltage

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The GE Fanuc Emerson IC670ALG320 is an analog voltage/current output module. This module provides four (4) output channels with a resolution of 12 bits. These outputs can be employed for either current or voltage output ranges: from 4 milliamperes to 20 milliamperes, or from 0 volts DC to 10 volts DC. These output voltage and current ranges can be extended from 0 milliamperes to 20 milliamperes, and from 0 volts DC to 12.5 volts DC by employing an installed jumper on the terminal block. The IC670ALG320 provides a default scaling range from 0 to 20000 that can be reprogrammed through the handheld monitor for the desired current output value or engineering units converting. This module draws a current of 180 milliamperes at a voltage of 24 volts DC.

The IC670ALG320 outputs employ the backplane optical isolation offered by optocouplers to provide electrical isolation. The device includes a single LED indicator on the faceplate to show the module and diagnostics status. The unit dissipates an electrical power of 4.3 watts. The module requires a current of 51 milliamperes from the BIU power supply. This device supports a non-condensing relative humidity range from 5 percent to 95 percent and a vibration frequency range from 10 hertz to 500 hertz. This output module employs an analog output data length of 4 words. The IC670ALG320 is an open type module and should be mounted in an enclosure to protect the internal circuitry. The output module weighs approximately 240 grams (0.53 pounds) while shipping and operates at 0 degrees to 60 degrees Celsius (32 degrees to 140 degrees Fahrenheit) for industrial applications.

Technical Specifications

Brand GE Automation Fanuc / Emerson Automation
Series Field Control
Part Number IC670ALG320
Description Current/Voltage source analog output module
Number of channels 4
Load requirement 51 mA from BIU power supply
Resolution 12 bits
Power dissipation 1.5 Watts Minimum, 4.3 Watts Maximum
Output current ranges 4 mA– 20 mA, 0 mA – 20 mA
Output voltage ranges 0 volts to +10 volts, 0 volts to +12.5 volts
Voltage/Current impedance 2K Ohms minimum for 10V output, 5 K for 12.5V output / 0 Ohms minimum, 600 Ohms maximum
Power supply range 20 to 29 volts DC (5% maximum ripple)
Power input current Standby (no output) : 80 mA typical - Operating : 180 mA (including loop current), maximum
Operating temperature 0 to 60 degrees C (32 to 140 degrees F)
Weight 240 g (0.53 lb)
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the IC670ALG320?

Answer: Yes. We offer repairs for the IC670ALG320 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Emerson - GE Fanuc and IC670ALG320?

Answer: If you buy the IC670ALG320 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the IC670ALG320 online?

Answer: Yes. Automation Stop sells the IC670ALG320 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the IC670ALG320?

Answer: The IC670ALG320 is made by Emerson - GE Fanuc.


Question: What Brand does the IC670ALG320 have?

Answer: The Rockwell Automation IC670ALG320 has a GE Automation Fanuc / Emerson Automation Brand.


Question: What Description is included with the Allen Bradley/Rockwell Automation IC670ALG320?

Answer: The Allen Bradley/Rockwell Automation IC670ALG320 has a Current/Voltage source analog output module Description.


Question: What is the Load requirement of the IC670ALG320?

Answer: The Rockwell Automation IC670ALG320 has a Load requirement of 51 mA from BIU power supply unit.


Question: What is the Number of channels of the Allen Bradley/Rockwell Automation IC670ALG320?

Answer: The IC670ALG320 has a Number of channels of 4.


Question: What is the Operating temperature of the Allen Bradley-Rockwell Automation IC670ALG320?

Answer: The Allen Bradley-Rockwell Automation IC670ALG320 has a Operating temperature of 0 to 60 degrees C (32 to 140 degrees F).


Question: What is the Output current ranges of the IC670ALG320?

Answer: The Allen-Bradley IC670ALG320 has a Output current ranges of 4 mA– 20 mA, 0 mA – 20 mA.


Question: What is the Output voltage ranges of the IC670ALG320?

Answer: The Output voltage ranges of the Rockwell Automation IC670ALG320 is 0 volts to +10 volts, 0 volts to +12.5 volts.


Question: What is the part Number of the IC670ALG320?

Answer: The IC670ALG320 has a component Number of IC670ALG320.


Question: What is the Power dissipation of the Allen-Bradley IC670ALG320?

Answer: The IC670ALG320 has a Power dissipation of 1.5 Watts Minimum, 4.3 Watts Maximum.


Question: What Power input current does the Rockwell Automation IC670ALG320 have?

Answer: The Power input current of the Rockwell Automation IC670ALG320 is Standby (no output) : 80 mA typical - Operating : 180 mA (including loop current), maximum.


Question: What power supply range does the IC670ALG320 have?

Answer: The power supply component range of the Allen Bradley Automation IC670ALG320 is 20 to 29 volts direct current (5% maximum ripple).


Question: What is the Resolution of the IC670ALG320?

Answer: The Resolution of the IC670ALG320 is 12 bits.


Question: What Voltage/Current impedance does the Rockwell Automation IC670ALG320 have?

Answer: The IC670ALG320 has a Voltage/Current impedance of 2K Ohms minimum for 10 volts output, 5 K for 12.10 volts output / 0 Ohms minimum, 600 Ohms maximum.


Question: What is the Weight of the IC670ALG320?

Answer: The Weight of the IC670ALG320 is 240 g (0.53 lb).


Series information for IC670ALG320

For additional information about IC670ALG320 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC670ALG320.

Revision Part # Also Known As Availability
IC670ALG320C IC670ALG320 Series C, Rev C Request a Quote
IC670ALG320-CCA1 IC670ALG320 Series CCA1, Rev CCA1 Request a Quote
IC670ALG320J IC670ALG320 Series J, Rev J Request a Quote
IC670ALG320L IC670ALG320 Series L, Rev L Request a Quote

Common Misspellings:

  • IC670ALG32O
  • IC670AL6320
  • IC670AL632O
  • IC67OALG320
  • IC67OALG32O
  • IC67OAL6320
  • IC67OAL632O
  • ICG70ALG320
  • ICG70ALG32O
  • ICG70AL6320
  • ICG70AL632O
  • ICG7OALG320
  • ICG7OALG32O
  • ICG7OAL6320
  • ICG7OAL632O
  • 1C670ALG320
  • 1C670ALG32O
  • 1C670AL6320
  • 1C670AL632O
  • 1C67OALG320
  • 1C67OALG32O
  • 1C67OAL6320
  • 1C67OAL632O
  • 1CG70ALG320
  • 1CG70ALG32O
  • 1CG70AL6320
  • 1CG70AL632O
  • 1CG7OALG320
  • 1CG7OALG32O
  • 1CG7OAL6320
  • 1CG7OAL632O

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP