GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | Y-2012-2-H04AA |
Series: | Y Series |
Description:
The Y-2012-2-H04AA is a servo motor, which is a brushless servo motor from Allen- Bradley's Y category product range. This is a servo motor from the Y sequence that has a brake. The highest-rated speed of the Y-2012-2-H04AA brushless servo motor is 4500. revolutions per minute. It produces steady torque of 1.4 N.m and the highest torque of 3.8 N.m. The shaft diameter of the Y-2012-2-H04AA brushless servo motor is 0.55 inches.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Y-2012-2-H04AA is a Rockwell Automation Inc. Y-series product. The Y-2012-2-H04AA motor is available with a variety of braking configurations and can be converted into a TLY-A230T-HK64AA TL-Series (Bulletin TLY) motor. This motor is designed in metric measurements, which means that inch dimensions are approximate conversions from the millimeter dimensions originally specified. Each product number, regardless of whether it is a Y-series, N-series, or any other series, is comprised of numerous characters; each character denotes a distinct choice for that product. For instance, the Y-2012-2-H04AA motor's characteristics correspond to a certain version. The first letter, 'Y,' indicates the series designation; '2012' indicates the frame size of the unit; '2' indicates the motor winding voltage designation; 'H' indicates the optical encoder line count; '04' indicates the options (in this case, a 24 Volt DC brake); and 'AA' indicates factory designated special options.
The Y-series product line is commonly available with 230 Volt windings; the Y-2012-2-H04AA module is one of those modules. It has a top speed of 4500 RPM and a constant stall torque of 1.4 N-m or 12 pounds per inch, compared to a peak stall torque of 3.8 N-m or 33.7 pounds per inch. The Y-2012-2-H04AA motor's rated output is 0.51 kW, which enables it to operate with the maximum radial and axial shaft loads. The maximum axial shaft weight is 10 kilograms (25 kilos). The maximum radial shaft weight is 25 kilograms (55.125 pounds) (22.05 pounds). The Y-2012-2-H04AA is compatible with a 2094-ACxx-Mxx-S or 2094-AMxx-S motor feedback cable with incremental feedback and a 2090-UXNFBY-Sxx (pre-molded connection) motor feedback cable with continuous feedback. These servo motors are used to power machinery and should not be connected directly to the power source. It is critical to understand and carefully follow the installation instructions. It serves as a warning not to operate a motor that has been improperly mounted. When the Y-2012-2-H04AA is placed, all essential power and data cables can be connected. Once down, put a drip loop in the cable to direct liquids away from all downward-pointing connectors.
Question: Does Automation Stop offer repairs on the Y-2012-2-H04AA?
Answer: Yes. We offer repairs for the Y-2012-2-H04AA and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and Y-2012-2-H04AA?
Answer: If you buy the Y-2012-2-H04AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the Y-2012-2-H04AA online?
Answer: Yes. Automation Stop sells the Y-2012-2-H04AA online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the Y-2012-2-H04AA?
Answer: The Y-2012-2-H04AA is made by Allen Bradley - Miscellaneous.
Question: What type of product is the Y-2012-2-H04AA?
Answer: The Y-2012-2-H04AA is part of the Y Series series.
For additional information about Y-2012-2-H04AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding Y-2012-2-H04AA.
Revision Part # | Also Known As | Availability |
---|---|---|
Y-2012-2-H04AA/A | Y-2012-2-H04AA Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.