GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | SP-110997 |
Series: | SP |
Description:
Allen-Bradley?s SP-110997 is a discrete field control armature pulse board belonging to the product series of Bulletin SP, or spare parts kit. These field control armature pulse boards are designed with four (4) inputs and two (2) outputs. Four (4) programmable 11-bit digital inputs are converted into two (2) analog outputs. This device has four (4) resistors that each have a power rating of two (2) watts. The weight of this device is approximately 0.23 kilograms. The dimensions of this product are 28 cm x 8 cm x 3.8 cm.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number SP-110997 is a field control armature pulse board operational at a voltage range of 300 to 375 volts AC. This printed board assembly is manufactured by Allen-Bradley, and it comes with four (4) outputs. These four outputs are 11-bit digital to analog outputs that are easily programmable according to certain requirements. The actual configuration of this board is dependent on specific application requirements. Two (2) types of parameters are associated with this field control board: set-up and configurable parameters. The set-up parameters are involved in the programming of the board functions. While the configurable parameters monitor the operation of Bulletin 1395 products. It is a static-sensitive device; therefore, it should be stored in an anti-static bag. Before mounting, it is important to determine which port it will be connected to. Then it is mounted using five-panel screws and one Phillips head screw. The analog Inputs / Outputs are present at J4 while the digital inputs/outputs are present at J3. The SP-170130 and SP-170131 boards of the digital DC 1395 drives supersedes this SP-110997 field control board. All external wiring to this board is terminated at the bottom of the drive, which is present at the terminal block TB3 location.
The outputs of the Allen-Bradley SP-110997 convert a drive signal of ± 2048 to a ± 10 volts DC analog output. The effective range of this drive’s signal can be amplified to ± 32767 through offset and scale parameters. This board features either a 120 volts AC or 10 volts DC board configuration, while other aspects of this product include four (4) resistors with a power rating of 2 watts each, a weight of 0.23 kilograms, a temperature range of 0 °C to 60 °C, and a 95% non-condensing relative humidity rating. The physical dimensions of this device measure 28 cm x 8 cm x 3.8 cm.
Question: Does Automation Stop offer repairs on the SP-110997?
Answer: Yes. We offer repairs for the SP-110997 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and SP-110997?
Answer: If you buy the SP-110997 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the SP-110997 online?
Answer: Yes. Automation Stop sells the SP-110997 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the SP-110997?
Answer: The SP-110997 is made by Allen Bradley - Miscellaneous.
For additional information about SP-110997 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding SP-110997.
Revision Part # | Also Known As | Availability |
---|---|---|
SP-110997/A | SP-110997 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.