GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | W46 |
Series: | misc |
Description:
Product number W46 is a thermal overload heater element. This device, which was designed and manufactured by Allen Bradley / Rockwell Automation, is intended to be used with thermal overload relays. This device belongs to the Class 20 trip class. The maximum full load current of this device is 5.82 amperes for size 00...0. Additionally, for size 1, the full load current is rated at 5.68 amperes. This device has a NEMA continuous current rating of 9 amperes for size 00, 18 amperes for size 0, and 27 amperes for size 1.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The W46 is a product of Allen Bradley / Rockwell Automation. This device is a thermal overload heater element belonging to the series W product line. It is normally used with the thermal overload relays made of Eutectic alloy and whose main function is to offer protection to the main circuit. They are electromechanical devices that protect the motors by cutting off power, especially during phase failure or during overloads. That is when motor draws up excessive current over a prolonged period of time. The heater element has a maximum full load current of 5.82 amperes for size 00...0, whereas for size 1, the maximum full load current is indicated as 5.68 amperes. This heater element is a trip Class 20 device, which implies that when the thermal current rating is 6 times the maximum rating (600 percent more), then the time taken for the heater element to trip will be 20 seconds or less.
The controller ambient temperature is considered to be 40 degrees Celsius, or the equivalent temperature of 104 degrees Fahrenheit. Similarly, the ambient temperature for the motor is also 40 degrees Celsius, or the equivalent of 104 degrees Fahrenheit. The cables used with the heater element are of type W, meaning that they are designed to be used in systems that perform heavy duties, such as power supply cables. The service factor for this heater element is at least 1.15. The NEMA continuous current rating for size 00 is 9 amperes, 18 amperes for size 0, and 27 amperes for size 1.
Question: Does Automation Stop offer repairs on the W46?
Answer: Yes. We offer repairs for the W46 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and W46?
Answer: If you buy the W46 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the W46 online?
Answer: Yes. Automation Stop sells the W46 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the W46?
Answer: The W46 is made by Allen Bradley - Miscellaneous.
For additional information about W46 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding W46.
Revision Part # | Also Known As | Availability |
---|---|---|
W46/A | W46 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.