GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | P29 |
Series: | misc |
Description:
Product number P29 is a heater element that was designed and produced by Allen Bradley. This heater element was designed to be used with thermal overload relays. It can also be used with line starters from the Bulletin 100, 500, 609, and 1200 series of products. This is a Type J device. Additionally, it is a size C heater element. This heater element has a trip class of 10. The full load current rating of this product is 5.43 amperes.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number P29 is a heater element. Designed and manufactured by the company known as Allen Bradley / Rockwell Automation, this product was designed to be used with thermal overload relays. This product can also be used with the line starters featured in the Bulletin 100, 500, 609, and 1200 product series. This unit is most commonly known as a eutectic alloy heater element or an overload relay heater element. This Allen Bradley product is a Type J device. Additionally, this product is classified as a size C heater element. Eutectic overload relays utilize a eutectic alloy, which is housed in a tube and connected to a heater winding. The heater winding heats the alloy as the supply current to the motor flows through it. When the alloy reaches a high enough temperature, it transforms into a liquid.
The protection class of the Allen Bradley P29 thermal overload heater element is ten (10). Its trip duration is ten (10) seconds or less at a current equal to six hundred percent (600%) of its rating. The full load current of this thermal overload heater element is 5.43 amperes. The ambient temperature rating suitable for the controller is forty (40) degrees Celsius. Likewise, the ambient temperature rating for the motor is forty (40) degrees Celsius. Aside from that, the service factor of this electronic overload relay device is either greater than or equal to 1.15. The Allen Bradley P29 thermal overload heater element is has numerous certifications. These certifications include CSA and UL.
Question: Does Automation Stop offer repairs on the P29?
Answer: Yes. We offer repairs for the P29 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and P29?
Answer: If you buy the P29 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the P29 online?
Answer: Yes. Automation Stop sells the P29 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the P29?
Answer: The P29 is made by Allen Bradley - Miscellaneous.
For additional information about P29 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding P29.
Revision Part # | Also Known As | Availability |
---|---|---|
P29/A | P29 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.