GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Drive |
Part Number: | 20A-DG01 |
Series: | misc |
Description:
The Allen-Bradley 20A-DG01 is a Safe Torque Off option that can be used in PowerFlex AC drives to enhance the safety characteristics of the control system. The device has a power dissipation rating of 4.4 watts and has a strip length of 10 millimeters.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley 20A-DG01 is a highly effective safety option that can be used in conjunction with alternating current drives that have adjustable frequency characteristics to improve the safety levels of the control system. The device provides a Safe Torque Off option that uses an optocoupler blockage to protect the components of the system. When the communication channels that connect the speed control drives to the mechanical components of the motor are disconnected, this device stops the frequency modulation process and prevents electrical power from being supplied to the motor. This can potentially prevent the components of the automation system from being damaged due to surges in electrical power from specific sources in the control system. This option can also be used to protect drives that have variable frequency characteristics.
The Allen-Bradley 20A-DG01 is primarily used in electrical circuits that ensure the speed control of the rotating components of the system with the help of alternating current drives that belong to Rockwell Automation’s PowerFlex Series. The device produces the best possible safety characteristics when it draws power from an electrical supply rated at 24 volts of direct current. At the rated voltage, the power dissipation of the device is 4.4 watts. The device has a compact design and has a total strip length of 10 millimeters. The usage of this option improves the Safety Integrity Level of the control system and allows the user to focus on improving the productivity of the industrial automation system. This device can function only if the enhanced control features of the PowerFlex drives are enabled.
Brand: | Allen-Bradley / Rockwell Automation |
Series: | DriveGuard Series |
Part Number: | 20A-DG01 |
Item Type: | Safety Interface |
Kit Installation: | Field |
Power Supply: | 24V DC |
Power Consumption: | 4.4 W |
Conductor Type: | Multi-conductor shielded cable |
Wire Size: | 28-18 AWG |
Strip Length: | 10 mm (0.39 inches) |
Operating temperature: | 0° to +55°C (+32° to +131°F) |
Storage temperature: | -25° to +70°C (-13° to +158°F) |
Shock (operating): | 15 g at 11 ms |
Shock (nonoperating): | 30 g at 11 ms |
Vibration (operating): | 2g up to 2000 Hz |
Question: Does Automation Stop offer repairs on the 20A-DG01?
Answer: Yes. We offer repairs for the 20A-DG01 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 20A-DG01?
Answer: If you buy the 20A-DG01 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 20A-DG01 online?
Answer: Yes. Automation Stop sells the 20A-DG01 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 20A-DG01?
Answer: The 20A-DG01 is made by Allen Bradley - Miscellaneous.
Question: What Brand: does the 20A-DG01 have?
Answer: The Allen-Bradley 20A-DG01 has a Allen Bradley / Rockwell Automation Brand:.
Question: What Conductor Type: is included with the Allen Bradley-Rockwell Automation 20A-DG01?
Answer: The 20A-DG01 has a Multi-conductor shielded cable Conductor Type:.
Question: What Item Type: does the Rockwell-Automation 20A-DG01 have?
Answer: The 20A-DG01 has a Safety Interface Item Type:.
Question: What Kit Installation: does the 20A-DG01 have?
Answer: The Allen Bradley Automation 20A-DG01 has a Field Kit Installation:.
Question: What is the Operating temperature: of the 20A-DG01?
Answer: The Allen-Bradley 20A-DG01 has a Operating temperature: of 0° to +55°C (+32° to +131°F).
Question: What is the unit Number: of the Allen Bradley/Rockwell Automation 20A-DG01?
Answer: The 20A-DG01 has a unit Number: of 20A-DG01.
Question: What Power Consumption: does the 20A-DG01 have?
Answer: The 20A-DG01 has a Power Consumption: of 4.4 W.
Question: What power supply: does the 20A-DG01 have?
Answer: The 20A-DG01 has a power supply component: of 24 volts direct current (DC).
Question: What Series: does the Allen Bradley-Rockwell Automation 20A-DG01 have?
Answer: The Allen Bradley-Rockwell Automation 20A-DG01 has a DriveGuard Series Series:.
Question: What is the Shock (nonoperating): of the 20A-DG01?
Answer: The 20A-DG01 has a Shock (nonoperating): of 30 g at 11 ms.
Question: What Shock (operating): does the 20A-DG01 have?
Answer: The Shock (operating): of the 20A-DG01 is 15 g at 11 ms.
Question: What Storage temperature: does the Rockwell-Automation 20A-DG01 have?
Answer: The Rockwell-Automation 20A-DG01 has a Storage temperature: of -25° to +70°C (-13° to +158°F).
Question: What Strip Length: does the 20A-DG01 have?
Answer: The 20A-DG01 has a Strip Length: of 10 mm (0.39 inch).
Question: What is the Vibration (operating): of the 20A-DG01?
Answer: The Vibration (operating): of the Allen Bradley Automation 20A-DG01 is 2g up to 2000 Hz.
Question: What Wire Size: does the Allen Bradley-Rockwell Automation 20A-DG01 have?
Answer: The Wire Size: of the 20A-DG01 is 28-18 AWG.
For additional information about 20A-DG01 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 20A-DG01.
Revision Part # | Also Known As | Availability |
---|---|---|
20A-DG01/A | 20A-DG01 Ser A, Series A, Rev A | Request a Quote |
20A-DG01/B | 20A-DG01 Ser B, Series B, Rev B | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.