GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 800T-XA |
Series: | Allen Bradley 800T |
Description:
The Allen Bradley 800T-XA is a contact block that belongs to the 800T Bulletin. It has one NC contact and one NO contact and a voltage range of 200V AC. The users can mount this unit with a screw to its base for its mounting type is base. Its contact configuration is SPDT and current rating of 10 amps. It has 1 power pole, and it is compatible with the 800T push buttons.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 800T-XA is a shallow contact block by Allen Bradley/ Rockwell Automation. It is from the 800T series and is popular as a 20 millimeter push button. This unit is also compatible with the 800H product line. In addition, this 800T contact block has a voltage rating of 600 VAC, and it has a voltage protection rating of 600V. Its length is 1.4 millimeters, and its height is 1.7 mm. It has one normally open contact and one closed contact.
Concerning the build quality of this product, the material used to make this shallow contact block is nonmetallic. It allows base mounting through screws. This model contains various standards and certifications such as CCC, CE-LVD, CSA, MARINE-ABS, C/US, and UL. This model does not include any guards for finger safeguards. Aside from that, the 800T contact block has 10 to 2000 Hz vibration and 2200 volts for one minute, 1300 volts for one minute (logic reed) dielectric strength. Besides that, these modules should be operated at -40… +131 °F (-40… +55 °C) and are stored at -40… +185 °F (-40… +85 °C), respectively. It's important to mention that the below-freezing working temperatures are dependent on the absence of moisture and liquid. For usage in lower temperature settings, operators should contact the manufacturers. It must not come into contact with contaminants such as gases, liquids, and other dangerous chemicals should be kept far away from this contact block and the maintenance and configuration of this block be conducted by the trained personnel.
Question: Does Automation Stop offer repairs on the 800T-XA?
Answer: Yes. We offer repairs for the 800T-XA and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 800T-XA?
Answer: If you buy the 800T-XA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 800T-XA online?
Answer: Yes. Automation Stop sells the 800T-XA online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 800T-XA?
Answer: The 800T-XA is made by Allen Bradley - Miscellaneous.
For additional information about 800T-XA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 800T-XA.
Revision Part # | Also Known As | Availability |
---|---|---|
800T-XA/A | 800T-XA Ser A, Series A, Rev A | Request a Quote |
800T-XA/B | 800T-XA Ser B, Series B, Rev B | Request a Quote |
800T-XA/C | 800T-XA Ser C, Series C, Rev C | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.