GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 800T-PB16 |
Series: | Allen Bradley 800T |
Description:
The Allen-Bradley 800T-PB16 is an 800T family 30 mm extended head momentary push button operator. The factory assembled pushbutton has standard contact blocks with a one (1) NO and one (1) NC contact configuration. This device does not have finger safeguards or a lens cap. The push button has a transformer power input with incandescent illumination. The voltage rating of this device is 120 volts AC at 50/60 hertz. This push button is equipped with screw-on electrical connections.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley 800T-PB16 is an 800T extended head push button operator without a guard. The momentary contact push button is factory assembled and is designed with incandescent illumination option. The push button standard one (1) normally open (NO) - one (1) normally closed (NC) contact blocks come without finger safeguards on the terminals. The pushbutton has an extended head without an actuator and also does not include a lens cap. The lens is round without a color specification. The pushbutton has a transformer (or dual input) type power module with a voltage specification of 120 volts AC at 50/60 hertz. It has screw type electrical connections with conductor sizes of #18 to 14 AWG, or #18 to10 AWG at max duty, and a terminal screw torque of 6 to 8 pound-inches (lb-in). It has a mounting hole size of 30.5 mm.
The 800T-PB16 push button was designed to have an electrical lifecycle of approximately ten million (10,000,000) cycles. Additionally, this device has a mechanical lifecycle of approximately two hundred and fifty thousand (250,000) cycles. The push button has a dielectric strength of 2200 V per minute. The button has an operating temperature that should range from -40 to +131 degrees Fahrenheit, or -40 to +55 degrees Celsius. Additionally, when storing this device, the temperature should range from -40 to +185 degrees Fahrenheit, or -40 to +85 degrees Celsius. The relative humidity of the area surrounding the device should have levels of 50 to 95 percent. This push button has physical dimensions measuring approximately 179 mm x 46 mm x 53.2 mm, and it weighs around 0.24 kilograms.
Question: Does Automation Stop offer repairs on the 800T-PB16?
Answer: Yes. We offer repairs for the 800T-PB16 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 800T-PB16?
Answer: If you buy the 800T-PB16 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 800T-PB16 online?
Answer: Yes. Automation Stop sells the 800T-PB16 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 800T-PB16?
Answer: The 800T-PB16 is made by Allen Bradley - Miscellaneous.
For additional information about 800T-PB16 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 800T-PB16.
Revision Part # | Also Known As | Availability |
---|---|---|
800T-PB16/A | 800T-PB16 Ser A, Series A, Rev A | Request a Quote |
800T-PB16/B | 800T-PB16 Ser B, Series B, Rev B | Request a Quote |
800T-PB16/C | 800T-PB16 Ser C, Series C, Rev C | Request a Quote |
800T-PB16/D | 800T-PB16 Ser D, Series D, Rev D | Request a Quote |
800T-PB16/E | 800T-PB16 Ser E, Series E, Rev E | Request a Quote |
800T-PB16/F | 800T-PB16 Ser F, Series F, Rev F | Request a Quote |
800T-PB16/G | 800T-PB16 Ser G, Series G, Rev G | Request a Quote |
800T-PB16/H | 800T-PB16 Ser H, Series H, Rev H | Request a Quote |
800T-PB16/I | 800T-PB16 Ser I, Series I, Rev I | Request a Quote |
800T-PB16/J | 800T-PB16 Ser J, Series J, Rev J | Request a Quote |
800T-PB16/K | 800T-PB16 Ser K, Series K, Rev K | Request a Quote |
800T-PB16/L | 800T-PB16 Ser L, Series L, Rev L | Request a Quote |
800T-PB16/M | 800T-PB16 Ser M, Series M, Rev M | Request a Quote |
800T-PB16/N | 800T-PB16 Ser N, Series N, Rev N | Request a Quote |
800T-PB16/O | 800T-PB16 Ser O, Series O, Rev O | Request a Quote |
800T-PB16/P | 800T-PB16 Ser P, Series P, Rev P | Request a Quote |
800T-PB16/Q | 800T-PB16 Ser Q, Series Q, Rev Q | Request a Quote |
800T-PB16/R | 800T-PB16 Ser R, Series R, Rev R | Request a Quote |
800T-PB16/S | 800T-PB16 Ser S, Series S, Rev S | Request a Quote |
800T-PB16/T | 800T-PB16 Ser T, Series T, Rev T | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.