GE / IP FANUC Series 90/30 In Stock

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

800T-H17

Manufacturer: Allen Bradley - Miscellaneous
Product Type: Automation Product
Part Number: 800T-H17
Series: Allen Bradley 800T

Description:

Designed and manufactured by Allen Bradley, part number 800T-H17 is a selector switch module that belongs to the Bulletin 800T series of products. This module has a voltage rating of 600 volts AC (alternating current). This selector switch is a two (2) position module. It has mounting holes that measure 35 millimeters. It has an operating temperature range of -40 to 55 degrees Celsius, as well as a storage temperature range of -40 to 85 degrees Celsius.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Part number 800T-H17 is a selector switch module. This module was designed and manufactured by the company known as Allen Bradley / Rockwell Automation. This module belongs to the Bulletin 800T series of products by Allen Bradley. This module is a selector switch and by spinning the handle, a selector switch may turn different current circuits on or off.  This Allen Bradley selector switch module has a voltage range that may rate up to six hundred (600) volts of alternating current (AC). Apart from that, this Allen Bradley selector switch module is a two (2) position module with a mounting hole size that measure thirty-point-five (30.5) millimeters. This Allen Bradley module may be maintained in both positions. This selector switch module has a contact configuration of one (1) normally open (NO) contact, as well as one (1) normally closed (NC) contact. Furthermore, this Allen Bradley selector switch module has a NEMA rating of NEMA 4/13. This device is not illuminated. When operating this selector switch module, it is important that the temperature of the surrounding area ranges from -40 degrees Celsius to 55 degrees Celsius, or the equivalent range of -40 degrees Fahrenheit to 131 degrees Fahrenheit. When this device is not operational and is being stored, the temperature of the surrounding area should range from -40 to 85 degrees Celsius, or -40 to 185 degrees Fahrenheit. The humidity of the area around this module should be 50% at 40 degrees Celsius, or 104 degrees Fahrenheit. In addition to that, this module is certified of approval by CSA or UL. 

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 800T-H17?

Answer: Yes. We offer repairs for the 800T-H17 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 800T-H17?

Answer: If you buy the 800T-H17 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 800T-H17 online?

Answer: Yes. Automation Stop sells the 800T-H17 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 800T-H17?

Answer: The 800T-H17 is made by Allen Bradley - Miscellaneous.


Series information for 800T-H17

For additional information about 800T-H17 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 800T-H17.

Revision Part # Also Known As Availability
800T-H17/A 800T-H17 Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 800T-HI7
  • 80OT-H17
  • 80OT-HI7
  • 8O0T-H17
  • 8O0T-HI7
  • 8OOT-H17
  • 8OOT-HI7
  • B00T-H17
  • B00T-HI7
  • B0OT-H17
  • B0OT-HI7
  • BO0T-H17
  • BO0T-HI7
  • BOOT-H17
  • BOOT-HI7

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP