GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 800T-FXJEQH2RA1 |
Series: | Allen Bradley 800T |
Description:
Designed and manufactured by Allen Bradley / Rockwell Automation, product number 800T-FXJEQH2RA1 is classified as a push-pull device. This device belongs to the Bulletin 800T series of products. This product has a voltage range of 12 to 130 volts AC/DC. This device has a contact configuration consisting of one (1) normally closed (NC) contact, as well as one (1) normally open (NO) contact. The operating temperature of this device should range from -40 to +104 degrees Fahrenheit.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 800T-FXJEQH2RA1 is a standard push-pull device. This device was designed and produced by the company known as Allen Bradley / Rockwell Automation. It belongs to the Bulletin 800T series of products. The voltage range of this push-pull device is 12 to 130 volts AC/DC. It comes with the standard block type and has a red colored lens. The head type of this unit is the jumbo mushroom head. It is also compatible with the E-Stop functionality. The contact configuration includes one (1) normally open (NO) contact and one (1) normally closed (NC) contact used on the contact blocks of this push-pull unit. There are no hazardous locations on this module. Part number 800T-FXJEQH2RA1 is not equipped with finger safeguards. Aside from that, this product features illumination in the form of a light emitting diode, or LED, embedded within it for indication of the statuses of various operations and applications. The Allen Bradley 800T-FXJEQH2RA1 push-pull device is a two(2) position module. The design architecture of this device is compact. When operating this device, the temperature of the surrounding environment should range from -40 degrees Celsius to +104 degrees Celsius, or the equivalent range of -40 degrees Celsius to +40 degrees Celsius. However, when this device is being stored, the temperature of the surrounding area should range from -40 degrees Celsius to +185 degrees Celsius, or -40 degrees Fahrenheit to +85 degrees Fahrenheit. Additionally, the appropriate humidity levels for this device should range from 50 percent to 95 percent from 25 to 60 degrees Celsius, or 77 to 140 degrees Fahrenheit.
Question: Does Automation Stop offer repairs on the 800T-FXJEQH2RA1?
Answer: Yes. We offer repairs for the 800T-FXJEQH2RA1 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 800T-FXJEQH2RA1?
Answer: If you buy the 800T-FXJEQH2RA1 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 800T-FXJEQH2RA1 online?
Answer: Yes. Automation Stop sells the 800T-FXJEQH2RA1 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 800T-FXJEQH2RA1?
Answer: The 800T-FXJEQH2RA1 is made by Allen Bradley - Miscellaneous.
For additional information about 800T-FXJEQH2RA1 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 800T-FXJEQH2RA1.
Revision Part # | Also Known As | Availability |
---|---|---|
800T-FXJEQH2RA1/A | 800T-FXJEQH2RA1 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.