GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 800T-A2B |
Series: | Allen Bradley 800T |
Description:
The 800T-A2B unit is manufactured by Allen-Bradley. The unit is a standard black momentary and flush head push button with a standard size of 30 millimeters (mm). It has no guards on terminals and has 4 standard contacts, which are two Normally Open (NO) standard contacts and two Normally Closed (NC) standard contacts. The minimum rating of voltage and current is 24 volts and 24 milliamperes, respectively. The maximum thermal continuous current is 10 amperes alternating current (AC) and 2.5 amperes direct current (DC).
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 800T-A2B unit is part of the 800T series of standard push buttons, which is manufactured by Allen-Bradley. The size of the 800T-A2B push button is 30 millimeters (mm) and is usually the standard size for push buttons. The push-button has a standard black color and is a momentary, as well as a flush head, push button. The terminals of the 800T-A2B have no guards, all push buttons have contacts, and the 800T-A2B has standard contacts, in which there are four (4). Two of the contacts are Normally Open (NO) and two of them are Normally Closed (NC). The voltage and current have a minimum rating of 24 volts and 24 milliamperes, respectively. Additionally, the maximum thermal continuous current for the 800T-A2B push button is 10 amperes alternating current (AC) and 2.5 amperes direct current (DC).
The lettering on the model defines the standard of the push button. In the case of 800T-A2B, letter "T" provides protection rating, "A" provides the operator type, "2" provides the color cap, and "B" provides the contact blocks. "T" describes the protection rating as metal and Type 4/13; "A" describes the operator type as flush head; "2" describes the color cap as black; and "B" describes the contacts, which are 2 Normally Open (NO) and 2 Normally Closed (NC) totaling 4 contact blocks. The unit features Snap-action contacts which is a quick make, quick break snap-action mechanism that is only available on factory-assembled units and creates a maximum continuous current rating of 10 amperes. The standard 800T push button is usually shipped with 3 washers and the total weight of the said unit is around 0.16 kilograms.
Question: Does Automation Stop offer repairs on the 800T-A2B?
Answer: Yes. We offer repairs for the 800T-A2B and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 800T-A2B?
Answer: If you buy the 800T-A2B through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 800T-A2B online?
Answer: Yes. Automation Stop sells the 800T-A2B online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 800T-A2B?
Answer: The 800T-A2B is made by Allen Bradley - Miscellaneous.
For additional information about 800T-A2B check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 800T-A2B.
Revision Part # | Also Known As | Availability |
---|---|---|
800T-A2B/A | 800T-A2B Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.