GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 800T-9PY |
Series: | Allen Bradley 800T |
Description:
Designed and manufactured by the company known as Allen Bradley / Rockwell Automation, part number 800T-9PY is a 30.5 mm push button. This device utilizes a pendant mount. This push button has a Type 13 enclosure. This device has nine (9) openings. It has a dielectric strength of 2200 volts for 1 minute, or 1300 volts for 1 minute via Logic Reed. The operating temperature range of this device is -40 to +55 degrees Celsius.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen Bradley 800T-9PY comes with both standard and custom-built enclosures/stations. Unlike other Push Buttons from this line of products from Allen Bradley that use flush an/or surface mounts, the 800T-9PY uses a pendant mount. This type of mount comes with an opening on the cover. It is a type 13 standard industrial enclosure. Ground safety is essential for any type of 30.5 mm push button, and the 800T-9PY is no different. Furthermore, to make installation and setup easier for the users, the Allen Bradley 800T-9PY comes with a bottom conduit entry feature. The Allen Bradley 800T-9PY must be placed inside an enclosure. The enclosure or the station is necessary to protect this pushbutton from external corrosions. Furthermore, the enclosure protects this push button from vapor and toxic gases. The Allen Bradley 800T-9PY 30.5 mm push button has nine (9) openings. This device has a dielectric strength rating of 2200 volts for one (1) minute, or 1300 volts for one (1) minute via Logic Reed. The electrical design life cycle of this product is one million (1,000,000) cycles at the rated load, or two hundred thousand (200,000) at the maximum rated load. This 30.5 mm push button has a recommended temperature for operation that ranges from -40 degrees Celsius to +55 degrees Celsius, or -40 degrees Fahrenheit to +131 degrees Fahrenheit. However, when storing this push button, the temperature should range from -40 degrees Celsius to +85 degrees Celsius, or -40 degrees Fahrenheit to +185 degrees Fahrenheit. The humidity rating for this push button is 50% at 40 degrees Celsius.
Question: Does Automation Stop offer repairs on the 800T-9PY?
Answer: Yes. We offer repairs for the 800T-9PY and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 800T-9PY?
Answer: If you buy the 800T-9PY through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 800T-9PY online?
Answer: Yes. Automation Stop sells the 800T-9PY online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 800T-9PY?
Answer: The 800T-9PY is made by Allen Bradley - Miscellaneous.
For additional information about 800T-9PY check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 800T-9PY.
Revision Part # | Also Known As | Availability |
---|---|---|
800T-9PY/A | 800T-9PY Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.