The Allen-Bradley produced 6189-RDT10C is a 10-inch terminal with a display that is part of the VersaView series. It has a resolution of 800 x 600 pixels. The 6189-RDT10C is equipped with a touchscreen as well as a graphical colored display. This analog resistive touchscreen should be operated using either a stylus or a gloved finger. The cutouts for the 6189-RDT10C ought to be 224 millimeters in height and 305 millimeters in thickness when installing the product. The gadget should have a minimum clearance of 51 millimeters from the bottom to top, as well as 25 millimeters from the edges, according to the manufacturer. These clearances are essential to ensure air movement and ventilation to prevent heat from building up around the enclosure during operation. To ensure proper operation, the ambient operating temperature surrounding the 6189-RDT10C should be between zero and fifty degrees Celsius. The use of cooling fans to decrease the temperature is advised if the temperature is higher than 55 degrees Celsius, while heaters may be used to raise the temperature to the required level if the temperature is lower than 0 degrees Celsius. Only factory-trained service technicians are authorized to install the terminal, and they must follow the manufacturer's installation recommendations. Making use of the proper safety equipment will help to ensure that electrostatic discharge is avoided. To avoid any system damage, check all of the connections before turning on the power to the device. This will ensure that all of the connections are securely in place and appropriately established. This model, which measures 248 millimeters in high, 329 millimeters in wide, and 55 millimeters in thickness, weighs around 2.6 kilograms. It is available in two colors: black and white.