GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

1492-IFM20F-F24A-2

Manufacturer: Allen Bradley - Miscellaneous
Product Type: Automation Product
Part Number: 1492-IFM20F-F24A-2
Series: Allen Bradley 1492
UPC: 10662468590454

Description:

Product number 1492-IFM20F-F24A-2 was designed and produced by Allen Bradley. This product is a 20-point digital interface module. This module is fusible. It has a voltage rating of 10 to 30 volts AC/DC. The maximum current per circuit of this device is 2 amperes, while the maximum current of the module is 12 amperes. It has physical dimensions that measure 4.33 inches x 3.27 inches x 2.78 inches. The temperature range suitable for this device's operation is 0 to 60 degrees Celsius.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Original Packaging

$285.00

Available: 2

What is Original Packaging

Your order will ship by . Need it faster?

Refurbished

$209.00

Available: 5

What is Refurbished

Your order will ship by . Need it faster?

Looking for a 1492-IFM20F-F24A-2? We can help!

Request a Quote

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Product number 1492-IFM20F-F24A-2 is a 20-point fusible digital interface module (IFM), that was designed and manufactured by Allen Bradley / Rockwell Automation. This device has a voltage rating of 10 to 30 volts AC/DC. The Allen Bradley 1492-IFM20F-F24A-2 digital interface module is equipped with extra terminals that have blown fuse LED indicators with a voltage rating of 24 volts AC/DC. Additionally, this module is equipped with two (2) field side terminals per I/O connection. The maximum current of this Allen Bradley device is 2 amperes per circuit, with the maximum current of the module being 12 amperes. The nominal indicator circuit current of this device is 2.4 milliamperes. This digital interface module by Allen Bradley has physical dimensions that measure 4.33 inches x 3.27 inches x 2.78 inches. When operating this interface module, it is important for the temperature of the area surrounding the device to range from zero (0) degrees Celsius to sixty (60) degrees Celsius. 

The Allen Bradley 1492-IFM20F-F24A-2 digital interface module has fuse holders included with it. However, this module does not include fuses. The fuse clips, power bus, and the blown fuse indicators of this device are isolated into two (2) groups of ten (10) terminals. By doing this, each group of input devices are able to reference a different power source. For quick installation, this digital interface module may be mounted via a standard DIN #3 rail mount. This Allen Bradley module supports wires that have a size ranging from 22 to 12 American Wire Gauge (AWG). 

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 1492-IFM20F-F24A-2?

Answer: Yes. We offer repairs for the 1492-IFM20F-F24A-2 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 1492-IFM20F-F24A-2?

Answer: If you buy the 1492-IFM20F-F24A-2 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 1492-IFM20F-F24A-2 online?

Answer: Yes. Automation Stop sells the 1492-IFM20F-F24A-2 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 1492-IFM20F-F24A-2?

Answer: The 1492-IFM20F-F24A-2 is made by Allen Bradley - Miscellaneous.


Series information for 1492-IFM20F-F24A-2

For additional information about 1492-IFM20F-F24A-2 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1492-IFM20F-F24A-2.

Revision Part # Also Known As Availability
1492-IFM20F-F24A-2/A 1492-IFM20F-F24A-2 Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 1492-IFM2OF-F24A-2
  • 1492-1FM20F-F24A-2
  • 1492-1FM2OF-F24A-2
  • I492-IFM20F-F24A-2
  • I492-IFM2OF-F24A-2
  • I492-1FM20F-F24A-2
  • I492-1FM2OF-F24A-2

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP