GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 1492-FB2C30-L |
Series: | Allen Bradley 1492 |
Description:
1492-FB2C30-L belongs to Allen Bradley?s Bulletin 1492 series of products. This device is part of the 2-pole C-class 30-ampere fuse holder family, which was designed to be used in several OEM applications ranging from power supplies, solenoids, and drives to equipment protection, as well as in lighting and heating loads. This fuse holder provides indication between 110 and 600 volts AC/DC, as well as its application for Class CC fuse installation means.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number 1492-FB2C30-L is a 2-pole, 30-ampere fuse holder designed and manufactured by Allen Bradley / Rockwell Automation for several industrial applications. This Class CC fuse holder is designed for supporting accurate fuse type installation, thus it rejects a Midget, as well as a Class J fuse. This device has a compact design. Due to this, it takes up less space on a panel and can be suitably positioned for field wiring applications. It is suitable for standard 35-millimeter DIN Rail mounts. This device has an IP20 rating and front finger-safe protection. It is fitted with a label holder and has an optional blown fuse indicator that assist with circuit troubleshooting. This holder type comes in 4 pieces per carton and has both a 5 millimeters x 5 millimeters and 6 millimeters x 5 millimeters slide-in marker accessory for labeling and identification.
Due to the amount of heat generated by fuses, the 1492-FB2C30-L fuse holder is incompatible with Mersen ATQR 1.25I 0.42 amperes current fuse, as well as the ATQR 1.40I, 0.47 amperes maximum current fuses. The holder can be used with Class CC fuses having a maximum of 600 volts AC/DC and a rated current of 30 amperes. The maximum rated current of this device is 200 kilo-amperes. This device has an operating temperature range of -4 to +130 degrees Fahrenheit and is compatible with copper stranded conductors. It accepts one (1) 18 to 4 AWG wire per terminal or two (2) 18 to 8 AWG wires per terminal with both wires having the same size.
Question: Does Automation Stop offer repairs on the 1492-FB2C30-L?
Answer: Yes. We offer repairs for the 1492-FB2C30-L and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 1492-FB2C30-L?
Answer: If you buy the 1492-FB2C30-L through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1492-FB2C30-L online?
Answer: Yes. Automation Stop sells the 1492-FB2C30-L online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1492-FB2C30-L?
Answer: The 1492-FB2C30-L is made by Allen Bradley - Miscellaneous.
Question: What amperage is included with the 1492-FB2C30-L?
Answer: The 1492-FB2C30-L by Allen Bradley - Miscellaneous has a amperage of 30.
For additional information about 1492-FB2C30-L check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1492-FB2C30-L.
Revision Part # | Also Known As | Availability |
---|---|---|
1492-FB2C30-L/A | 1492-FB2C30-L Ser A, Series A, Rev A | Request a Quote |
1492-FB2C30-L/B | 1492-FB2C30-L Ser B, Series B, Rev B | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.