GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 1492-CB3G150 |
Series: | Allen Bradley 1492 |
Description:
The 1492-CB3G150 is an Allen Bradley circuit breaker. This circuit breaker belongs to the Bulletin 1492 series of Allen Bradley products. This device is used for motor protection as a small protective unit. It can operate on 65 volts DC maximum or 277 volts AC to 480 volts AC, three-phase. This circuit breaker has a rated output power of 15 horsepower (Hp), as well as a current rating of up to 15 amperes.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 1492-CB3G150 is a circuit breaker used as a manual motor controller. It is designed and distributed by the Allen Bradley / Rockwell Automation. It is part of the 1492-CB product line. In addition, this module is also known as the supplementary protector miniature circuit breaker. It has three (3) power poles for configuration purposes. Furthermore, it has a six (6) to ten (10) magnetic tripping range and has a current rating of 15 amperes. This circuit breaker's AC input voltage range is 277 to 480 volts, three-phase. It can generate an output rating of 15 horsepower. It has a maximum DC voltage rating of 65 volts. This kind of circuit breaker helps motors to perform well, as well as allowing them to be used safely. It adds an extra layer of protection when the power source deals with the motors. It can also adjust the power that the connected device can generate. Since power optimization and precision over the machine's performance is a critical aspect in an industrial environment, the availability of these protective circuit breakers keeps the whole process safe and reduces the cost of productivity while ensuring safety on site. That said, the installation of this product should follow the guidelines of the manufacturer in order to keep the unit safe. This Allen Bradley circuit breaker is capable of being used as a replacement, or even a substitute, for other devic. The current status of this circuit breaker is that it has been discontinued by the manufacturer.
Question: Does Automation Stop offer repairs on the 1492-CB3G150?
Answer: Yes. We offer repairs for the 1492-CB3G150 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 1492-CB3G150?
Answer: If you buy the 1492-CB3G150 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1492-CB3G150 online?
Answer: Yes. Automation Stop sells the 1492-CB3G150 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1492-CB3G150?
Answer: The 1492-CB3G150 is made by Allen Bradley - Miscellaneous.
Question: What amperage is included with the 1492-CB3G150?
Answer: The 1492-CB3G150 by Allen Bradley - Miscellaneous has a amperage of 15.
For additional information about 1492-CB3G150 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1492-CB3G150.
Revision Part # | Also Known As | Availability |
---|---|---|
1492-CB3G150/A | 1492-CB3G150 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.