GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 100-C37EJ10 |
Series: | Allen Bradley 100 |
Description:
The 100-C37EJ10 is an IEC motor control system contactor manufactured by Allen-Bradley. The contactor can support a maximum of 37 amperes of load current and has a coil voltage rating of 24 volts DC with an integrated diode. The primary purpose of this device is to control the switching of motors in a motor system. This contactor has 3 poles with one normally open auxiliary contact. This contactor is IEC and UL certified.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
To control a motor system, the 100-C37EJ10 is more than capable with a maximum current rating of 37 amperes and offering up to 3 poles. The contactor has an electronic coil with a rating of 24 volts DC. This contactor supports motors with a power rating of 3 Hp (horsepower) at 115 volts AC on a single-phase and 5 Hp at 230 volts on a single phase. The supply frequency rating is 50/60 Hz. The contactor has one (1) normally open contact and all the contacts have a screw-type terminal configuration. This contactor has a compact size with dimensions of 97.5 millimeters x 45 millimeters x 105 millimeters (height x width x depth). The device must be installed in an area with a maximum ambient temperature of 40 degrees Celsius, to prevent any damage due to overheating.
A panel box must be used to install this contactor and to prevent moisture or any other environmental factor from affecting it. Since the device has an open-type enclosure, it is always recommended to install it in a panel box. The supported DIN rails for the 100-C37EJ10 are 35 millimeters in size, which is a standard size throughout the Bulletin 100-C series. It must be mounted vertically to prevent any kind of mechanical hindrances. The supported accessories for this contactor include mechanical latches, mechanical interlocks, electronic timers, and surge suppressors. The timer automatically switches the contactor when the desired condition is met, the surge suppressor provides extra protection by keeping the system safe against sudden electrical surges.
MPN | 100-C37EJ10 |
Series | MCS-C Non-Reversing Contactor |
Manufacturer | Allen Bradley |
Product Type | Compact Frame IEC Contactor |
Terminal Type | Standard |
Contactor Amperage | 37A |
Control Voltage | 24V DC |
Auxiliary Contacts | 1 N.O. 0 N.C. |
Main Poles | 3 |
Question: Does Automation Stop offer repairs on the 100-C37EJ10?
Answer: Yes. We offer repairs for the 100-C37EJ10 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 100-C37EJ10?
Answer: If you buy the 100-C37EJ10 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 100-C37EJ10 online?
Answer: Yes. Automation Stop sells the 100-C37EJ10 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 100-C37EJ10?
Answer: The 100-C37EJ10 is made by Allen Bradley - Miscellaneous.
Question: What is the Auxiliary Contacts of the 100-C37EJ10?
Answer: The Auxiliary Contacts of the 100-C37EJ10 is 1 N.O. 0 N.C..
Question: What is the contactor unit Amperage of the 100-C37EJ10?
Answer: The contactor component Amperage of the 100-C37EJ10 is 37A.
Question: What is the Control Voltage of the 100-C37EJ10?
Answer: The Control Voltage of the 100-C37EJ10 is 24 volts direct current.
Question: What is the Main Poles of the 100-C37EJ10?
Answer: The Main Poles of the Allen Bradley-Rockwell Automation 100-C37EJ10 is 3.
Question: What Product Type does the Rockwell-Automation 100-C37EJ10 have?
Answer: The 100-C37EJ10 has a Compact Frame IEC contactor unit Product Type.
Question: What Terminal Type is included with the 100-C37EJ10?
Answer: The 100-C37EJ10 has a Standard Terminal Type.
For additional information about 100-C37EJ10 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 100-C37EJ10.
Revision Part # | Also Known As | Availability |
---|---|---|
100-C37EJ10/A | 100-C37EJ10 Ser A, Series A, Rev A | Request a Quote |
100-C37EJ10/B | 100-C37EJ10 Ser B, Series B, Rev B | Request a Quote |
100-C37EJ10/C | 100-C37EJ10 Ser C, Series C, Rev C | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.