GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 100-C12DJ300 |
Series: | Allen Bradley 100 |
Description:
The 100-C12DJ300 is a four-pole IEC contactor from Allen-Bradley/Rockwell Automation. The module has an AC-3 current rating of 12 amperes and an AC-1 rating of 32 amperes. The main purpose of this contactor is to control motor systems. The device has an open-type enclosure and is recommended to be installed in a closed panel. This contactor device is UL and IEC certified and is made up of environmentally friendly materials.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 100-C12DJ300 a bulletin 100-C IEC contactor. The contactor is designed for motor control systems and similar inductive loads to protect the system from over-current issues without damaging the entire system or equipment. The device has a maximum current rating of 12 amperes (AC-3). The device can be operated with both AC and DC supply voltages. The 100-C12DJ300 has a coil voltage rating of 120 volts at 60 hertz and 110 volts at 50 hertz. The maximum operating temperature for this device is 40 degrees Celsius (104 degrees Fahrenheit) and must be installed in a well-protected area, preferably in a panel box or a 35 mm DIN rail, since the device has an open-type enclosure. The device offers a power rating of 4 kilowatts at 230 volts three-phase and a horsepower rating of 3 Hp at 230 volts three-phase. The device features three normally open contact poles and one normally closed contact pole, all contacts have screw-type terminals. Like the other contactors in the bulletin 100 series, this contactor can also be paired with other accessories such as timers, surge suppressors, and mechanical latches. The device comes in a single pack form from the manufacturer and comes with a coil terminal located on the line side. The device weighs 0.39 kilograms and measures around 134 millimeters x 187.8 millimeters x 190 millimeters. The contactor is made from environmentally friendly material to minimize harmful emissions. It is always recommended to go through the instruction manual when installing the product and follow all the safety procedures. The device is IEC and UL certified.
MPN | 100-C12DJ300 |
Series | MCS-C Non-Reversing Contactor |
Manufacturer | Allen Bradley |
Product Type | Compact Frame IEC Contactor |
Terminal Type | Standard |
Contactor Amperage | 12A |
Control Voltage | 24V DC |
Auxiliary Contacts | 0 N.O. 0 N.C. |
Main Poles | 3 N.O. 1 N.C. |
Question: Does Automation Stop offer repairs on the 100-C12DJ300?
Answer: Yes. We offer repairs for the 100-C12DJ300 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 100-C12DJ300?
Answer: If you buy the 100-C12DJ300 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 100-C12DJ300 online?
Answer: Yes. Automation Stop sells the 100-C12DJ300 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 100-C12DJ300?
Answer: The 100-C12DJ300 is made by Allen Bradley - Miscellaneous.
Question: What is the Auxiliary Contacts of the 100-C12DJ300?
Answer: The Auxiliary Contacts of the Allen Bradley/Rockwell Automation 100-C12DJ300 is 0 N.O. 0 N.C..
Question: What is the contactor component Amperage of the Rockwell-Automation 100-C12DJ300?
Answer: The contactor component Amperage of the 100-C12DJ300 is 12A.
Question: What Control Voltage does the 100-C12DJ300 have?
Answer: The Control Voltage of the 100-C12DJ300 is 24 volts DC.
Question: What Main Poles does the 100-C12DJ300 have?
Answer: The Main Poles of the Rockwell-Automation 100-C12DJ300 is 3 N.O. 1 N.C..
Question: What Product Type does the 100-C12DJ300 have?
Answer: The 100-C12DJ300 has a Compact Frame IEC contactor unit Product Type.
Question: What Terminal Type is included with the 100-C12DJ300?
Answer: The 100-C12DJ300 has a Standard Terminal Type.
For additional information about 100-C12DJ300 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 100-C12DJ300.
Revision Part # | Also Known As | Availability |
---|---|---|
100-C12DJ300/A | 100-C12DJ300 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.