GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | AK-R2-360P500 |
Series: | AK |
Description:
Item number AK-R2-360P500 is an Allen Bradley medium duty, external dynamic break for use with PowerFlex drives. It has an integral thermal switch and may exceed 200 degrees Celsius (392 degrees Celsius) during operation. This device was designed for applications with three-phase drives that have voltage ratings of 400 to 480 volts AC and 500 to 600 volts AC. The physical dimensions of this product measure 335 mm x 60 mm x 30 mm. The approximate weight of this device is 1.25 kilograms.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number AK-R2-360P500, which was designed and manufactured by Allen Bradley / Rockwell Automation, is a brake resistor device. This unit was designed for use with PowerFlex AC drives. This device is an external dynamic brake meant for medium duty applications. Its purpose is to provide bigger duty cycle capability, comparing to the internal type of break resistors. The AK-R2-360P500 item is a kit that, together with the break, also includes integral thermal switch. This feature allows it to be used in external safety circuits. The brake is for use with three-phase voltage input drives rated at 400 to 480 volts AC and 500 to 600 volts AC. The users should be aware for safety reasons, during operation, the resistor temperature increases and may reach over 200 degrees Celsius, or the equivalent of 392 degrees Fahrenheit.
The device has a dynamic break resistance of 360 ohms, plus or minus five (5) percent. When selecting the resistor, it is important to choose a resistor ohms value against the minimum resistance of the drive used. The break's rated continuous power is 0.086 kilowatts, and it has a maximum energy of 17 kilojoules. This module is suitable for applications with PowerFlex 4, 40, 40P, 70, 527, and others from the family of drives that have power ratings of 0.37, 0.75, and 1.5 kilowatts (0.5, 1, 2 horsepower). The maximum breaking torque varies with the motor model and power rating. For PowerFlex 70 drives, the break can provide breaking torque from 110 to 305 percent of the ND motor. This device has dimensions of 13.19 inches x 2.36 inches x 1.18 inches (335 millimeters x 60 millimeters x 30 millimeters) and weighs approximately 2.75 pounds (1.25 kilograms).
Question: Does Automation Stop offer repairs on the AK-R2-360P500?
Answer: Yes. We offer repairs for the AK-R2-360P500 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and AK-R2-360P500?
Answer: If you buy the AK-R2-360P500 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the AK-R2-360P500 online?
Answer: Yes. Automation Stop sells the AK-R2-360P500 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the AK-R2-360P500?
Answer: The AK-R2-360P500 is made by Allen Bradley - Miscellaneous.
For additional information about AK-R2-360P500 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding AK-R2-360P500.
Revision Part # | Also Known As | Availability |
---|---|---|
AK-R2-360P500/A | AK-R2-360P500 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.