GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | AK-R2-120P1K2 |
Series: | AK |
Description:
This AK-R2-120P1K2 is an external dynamic brake kit and it can be used in Allen-Bradley AC drives. This brake kit has a resistance of 120 Ohms. This dynamic brake kit comes available for 400-480 VAC and 600 VAC input drives that have output ratings of 2.2 kW, 4 kW, 5.5 kW, and 7.5 kW. These drives all have a continuous power rating of 0.26 kW and a maximum energy rating of 52 kJ.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
This AK-R2-120P1K2 is an external dynamic brake kit and is manufactured by Allen-Bradley. This kit belongs to PowerFlex 70 series. This brake kit resistance is 120 Ohms. This brake kit can be used with various ranges of drivers and motors. For example, this dynamic brake kit uses 2.2 kW (kilowatts), 4 kW, 5.5 kW, and 7.5 kW for the 400 to 480 Volts AC-rated motors and drives. For 400-480 VAC drives, the continuous power rating is 0.26 kW, and the maximum energy rating is five kilojoules. In the 400-480 VAC input category, the AK-R2-120P1K2 is available in drives with an output of 3 HP, 5 HP, 7.5 HP, and 10 HP. The maximum energy rate for this dynamic brake kit is 52 kilojoules. When this dynamic brake kit is in use, the temperature may rise to 200 degrees Celsius, particularly for these operations. Allen-Bradley AC drivers do not provide the required protection for external brake resistors like the AK-R2-120P1K2 kit. This brake kit should be operated with the required protection, and if it fails there is a risk of fire for the brake resistors. Allen-Bradley's recommendation is to protect external resistors from excessive temperatures. The user is advised to disconnect the system power before the installation of the brake kit, and it should be ensured that DC voltages are discharged to zero volts. For air cooling applications, a minimum separation of two inches out of 50.8 mm should be provided between the AC Drive and this external dynamic braking kit.
Question: Does Automation Stop offer repairs on the AK-R2-120P1K2?
Answer: Yes. We offer repairs for the AK-R2-120P1K2 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and AK-R2-120P1K2?
Answer: If you buy the AK-R2-120P1K2 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the AK-R2-120P1K2 online?
Answer: Yes. Automation Stop sells the AK-R2-120P1K2 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the AK-R2-120P1K2?
Answer: The AK-R2-120P1K2 is made by Allen Bradley - Miscellaneous.
For additional information about AK-R2-120P1K2 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding AK-R2-120P1K2.
Revision Part # | Also Known As | Availability |
---|---|---|
AK-R2-120P1K2/A | AK-R2-120P1K2 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.