GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 855T-G24SA1 |
Series: | 855T |
Description:
The 855T-G24SA1 is a tone sound module that comes with a total of thirteen distinct tones. This sound module comes with a stack light of 70 mm in diameter. It has a rated voltage of 24 volts AC/DC and a current rating of 65 milliamperes. This device is included in Allen-Bradley's Bulletin 855T product series. This device may convey application status and notify operators to important equipment and system requirements on the factory floor.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 855T-G24SA1 sound module by Allen-Bradley includes a 70 mm stack light. It is a product from the 855T series. These line devices, designated as Bulletin 855T, are intended to transmit application-related status, notifying essential equipment and system requirements on the factory floor. They may be preassembled to save time, or they can be bought as individual light and sound modules for bespoke installation on the job site. Single-circuit modules that include a selectable light choice, as well as a sound device that functions at the same time, are known as combined light modules with Piezo sounders. All two-circuit modules are comprised of two circuits that enable the functioning of either light or sound to be controlled independently. With the use of a DIP switch, the Piezo-style sound modules may be switched between pulsating and continuous sound.
An IP 65-rated enclosure is included inside this enclosure, which is constructed of Polycarbonate. It has a grayish hue to it. Its replacement flat washers for the mounting screw washer set are most often used to offer a seal where the mounting screws join the pole base. One (1) kit has a total of twenty (20) components. This module is rated as a NEMA 12 standard product. This sound module has received approval from the CE, UL, CUL, and KC. The proper environmental conditions are critical for successful functioning, and the storage temperature should be between -40 and 85 ° C. The usual operating temperature is between -25 ° C and 70 ° C.
Question: Does Automation Stop offer repairs on the 855T-G24SA1?
Answer: Yes. We offer repairs for the 855T-G24SA1 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 855T-G24SA1?
Answer: If you buy the 855T-G24SA1 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 855T-G24SA1 online?
Answer: Yes. Automation Stop sells the 855T-G24SA1 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 855T-G24SA1?
Answer: The 855T-G24SA1 is made by Allen Bradley - Miscellaneous.
For additional information about 855T-G24SA1 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 855T-G24SA1.
Revision Part # | Also Known As | Availability |
---|---|---|
855T-G24SA1/A | 855T-G24SA1 Ser A, Series A, Rev A | Request a Quote |
855T-G24SA1/B | 855T-G24SA1 Ser B, Series B, Rev B | Request a Quote |
855T-G24SA1/C | 855T-G24SA1 Ser C, Series C, Rev C | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.