GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

800H-QRTH2RAP

Manufacturer: Allen Bradley - Miscellaneous
Product Type: Automation Product
Part Number: 800H-QRTH2RAP
Series: 800H

Description:

This 800H-QRTH2RAP pilot light has heavy duty features and a wide input voltage range of 12 to 130 Volts AC/DC. It has push-to-test functionality and a red lens color.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The pilot light 800H-QRTH2RAP is plastic-made with no finger-safe guards with full voltage type power module. It houses a high intensity LED and has a push to test lamp test option. Its voltage rating is 12-130 Volts of alternating current or direct current, which is better than discrete voltage ratings of traditional options. The lens color is red. The lamp brightness stays uniform over the voltage range. The LED light shunts leakage current up to 3 milliamperes for correct on or off indication. The pilot light has built-in transient protection. The pass-through plunger facilitates contact block stacking. The separate lamps incorporate state-of-the-art LED technology and offer a reliable and durable bright pilot light. The installation is fast and easy, and consists of the pilot light gaskets with type 4/13 ingress protection, front plate with a 30.5 millimeter mounting hole, legend plate, thrust washer with anti-turn tab, and a mounting ring. The unit is corrosion resistant, water tight, and oil tight which makes it ideal for usage in heavy industrial stations and operators. The pilot light can be used for worldwide industry with its certification with UL Listing, CSA, CE mark, and CCC. The contact block for the push-to-test unit can be used for Class I Div. 2. The robust light can withstand vibration from 10 to 2000 Hertz with 0.006 inches (1.52 mm) of displacement (peak to peak) maximum with 10 G, and shock of ½ cycle sine-wave for 11 ms of 25 g for contact fragility and no damage at 100 g.

Technical Specifications

Protection rating Plastic, Type 4/4X/13
Finger-safe guard None
Power module type Full voltage
Lamp test option Push-to-test
Illumination High intensity LED
Voltage rating 12 to 130 Volts AC/DC
Lens color Red
Dielectric strength 2200 Volts for 1 minute
Mechanical lifecycle 250,000 min
Wire gauge #18 to 14 AWG
Operating temperature range -40 to 55°C (-40 to 131°F)
Storage temperature range -40 to 85°C (-40 to 185°F)
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 800H-QRTH2RAP?

Answer: Yes. We offer repairs for the 800H-QRTH2RAP and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 800H-QRTH2RAP?

Answer: If you buy the 800H-QRTH2RAP through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 800H-QRTH2RAP online?

Answer: Yes. Automation Stop sells the 800H-QRTH2RAP online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 800H-QRTH2RAP?

Answer: The 800H-QRTH2RAP is made by Allen Bradley - Miscellaneous.


Question: What is the Dielectric strength of the Allen Bradley 800H-QRTH2RAP?

Answer: The Dielectric strength of the 800H-QRTH2RAP is 2200 Volts for 1 minute.


Question: Does the Allen Bradley/Rockwell Automation 800H-QRTH2RAP have a Finger-safe guard?

Answer: None.


Question: What Illumination is included with the 800H-QRTH2RAP?

Answer: The 800H-QRTH2RAP has a High intensity LED Illumination.


Question: What Lamp test option is included with the Allen Bradley/Rockwell Automation 800H-QRTH2RAP?

Answer: The 800H-QRTH2RAP has a Push-to-test Lamp test option.


Question: What Lens color-supporting is included with the Allen-Bradley 800H-QRTH2RAP?

Answer: The Allen-Bradley 800H-QRTH2RAP has a Red Lens color-supporting.


Question: What is the Mechanical lifecycle of the 800H-QRTH2RAP?

Answer: The Mechanical lifecycle of the 800H-QRTH2RAP is 250,000 min.


Question: What is the Operating temperature range of the Rockwell-Automation 800H-QRTH2RAP?

Answer: The Operating temperature range of the 800H-QRTH2RAP is -40 to 55°C (-40 to 131°F).


Question: What Power module type does the 800H-QRTH2RAP have?

Answer: The Rockwell-Automation 800H-QRTH2RAP has a Full voltage Power module type.


Question: What is the Protection rating of the 800H-QRTH2RAP?

Answer: The 800H-QRTH2RAP has a Protection rating of Plastic, Type 4/4X/13.


Question: What Storage temperature range does the Allen Bradley 800H-QRTH2RAP have?

Answer: The Storage temperature range of the Allen Bradley 800H-QRTH2RAP is -40 to 85°C (-40 to 185°F).


Question: What is the Voltage rating of the 800H-QRTH2RAP?

Answer: The Voltage rating of the 800H-QRTH2RAP is 12 to 130 Volts alternating current (AC)/DC (direct current).


Question: What is the Wire gauge of the 800H-QRTH2RAP?

Answer: The 800H-QRTH2RAP has a Wire gauge of #18 to 14 AWG.


Series information for 800H-QRTH2RAP

For additional information about 800H-QRTH2RAP check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 800H-QRTH2RAP.

Revision Part # Also Known As Availability
800H-QRTH2RAP/A 800H-QRTH2RAP Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 80OH-QRTH2RAP
  • 8O0H-QRTH2RAP
  • 8OOH-QRTH2RAP
  • B00H-QRTH2RAP
  • B0OH-QRTH2RAP
  • BO0H-QRTH2RAP
  • BOOH-QRTH2RAP

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP