GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 800H-FPXAP |
Series: | 800H |
Description:
The Allen Bradley 800H-FPXAP is a 2-position push pull unit that belongs to the Bulletin 800H series of products. This series has components that can withstand hazardous environments. This unit has a standard barrel so it can be mounted on panels with a thickness of one inch. The actual push pull unit has a mushroom type head, which bigger in size and quite noticeable which prevents unintentional pushes. The cap of the unit has no color and no contacts.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 800H-FPXAP is an Allen Bradley Bulletin 800H Type 7 and 9 operator. These Bulletin 800H operators are designed to meet the National Electrical Code and properly mountable on Type 7 and Type 9 enclosures which are usually where hazardous devices or environments are located. These components are made of copper free die casted aluminum brushings and mounted rings. The shafts are a type #316 stainless steel with O-ring seal added for corrosion resistance. These components mount on a hole (threaded) in a suitable enclosure. The Bulletin 800H Type 7 and 9 have two (2) basic formats of standard barrel and long barrel. This component is from the standard barrel format, and this means that the device can be mounted on panels with thickness up to one inch. This format provides a lock system that prevents the mounting from becoming loose and falling. This 800H-FPXAP is a Push Pull Unit that has a standard barrel. The head on this push pull unit is a mushroom type. Mushroom head units are usually an ideal component for harsh environments as they are distinctively larger and accidental pressing or operating can be avoided. The mushroom head cap has no color, and it also has no contacts. The Push Pull button is either normally open, where the circuit breaks and the path is opened (the pull or OUT state), or normally closed, where the circuit is complete and the path is closed (the push or IN state). There are no guards on this device.
Question: Does Automation Stop offer repairs on the 800H-FPXAP?
Answer: Yes. We offer repairs for the 800H-FPXAP and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 800H-FPXAP?
Answer: If you buy the 800H-FPXAP through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 800H-FPXAP online?
Answer: Yes. Automation Stop sells the 800H-FPXAP online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 800H-FPXAP?
Answer: The 800H-FPXAP is made by Allen Bradley - Miscellaneous.
For additional information about 800H-FPXAP check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 800H-FPXAP.
Revision Part # | Also Known As | Availability |
---|---|---|
800H-FPXAP/A | 800H-FPXAP Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.