GE / IP FANUC Series 90/30 In Stock

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

800H-1HZX7

Manufacturer: Allen Bradley - Miscellaneous
Product Type: Automation Product
Part Number: 800H-1HZX7
Series: 800H

Description:

Part number 800H-1HZX7 is a shallow base unit that was designed and manufactured by the company known as Allen Bradley / Rockwell Automation. This is a single gang shallow base with a NEMA rating of NEMA Type 7 and NEMA Type 9. The enclosure of this shallow base unit has physical dimensions that measure 171.5 mm x 95.2 mm x 100.4 mm. This device weighs approximately 1.58 kilograms, or 3.5 pounds.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

The 800H-1HZX7 is a shallow base that was designed and produced by Allen Bradley / Rockwell Automation. It is a single gang base. It complies with the requirements of Class I, Group B, as stated by the National Electrical Code. This enclosure base has NEMA 7 and NEMA 9 ratings. Underwriters Laboratories, Inc. has listed this equipment. This shallow base cannot accommodate sealing well and sealed switched or stacked contact blocks. However, it can allow one level of contact block maximum when utilized with a sealing well. It comes with a conduit entry. This conduit has a dead-end of 3/4 inches. This conduit has 3/4 inches -14 thread size. It has NPT standard threads. It comes with 14 threads per inch. This base comes with four holes for mounting. Each mounting hole has a diameter of 8.7 millimeters (11/32 inches). the enclosure of this shallow base has physical dimensions that measure 171.5 millimeters x 95.2 millimeters x 100.4 millimeters (height x width x depth). This product has an approximate weight of 1.58 kilograms, or the equivalent of 3.5 pounds. The primary material of this base is cast aluminum. It is used with the Allen Bradley's 30-millimeter push buttons. This assembled base is also compatible with Bulletin 800H custom stations and field assemblies. The Bulletin 800H NEMA Type 7 and Type 9 operators can meet the standards of the National Electrical Code for Class I (Divisions 1 and 2, Groups B, C, and D), Class II ( Divisions 1 and 2, Groups E, F, and G) and Class III, when properly mounted in this shallow base.

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 800H-1HZX7?

Answer: Yes. We offer repairs for the 800H-1HZX7 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 800H-1HZX7?

Answer: If you buy the 800H-1HZX7 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 800H-1HZX7 online?

Answer: Yes. Automation Stop sells the 800H-1HZX7 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 800H-1HZX7?

Answer: The 800H-1HZX7 is made by Allen Bradley - Miscellaneous.


Series information for 800H-1HZX7

For additional information about 800H-1HZX7 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 800H-1HZX7.

Revision Part # Also Known As Availability
800H-1HZX7/A 800H-1HZX7 Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 800H-IHZX7
  • 80OH-1HZX7
  • 80OH-IHZX7
  • 8O0H-1HZX7
  • 8O0H-IHZX7
  • 8OOH-1HZX7
  • 8OOH-IHZX7
  • B00H-1HZX7
  • B00H-IHZX7
  • B0OH-1HZX7
  • B0OH-IHZX7
  • BO0H-1HZX7
  • BO0H-IHZX7
  • BOOH-1HZX7
  • BOOH-IHZX7

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP