GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 599-K04 |
Series: | 599 |
Description:
The Allen Bradley 599-K04 surge suppressor is a part of 500 line of contactors and starters. This device has a NEMA rating of 0 to 5, meaning that it can range from 0 to 0.5 square inches. This surge suppressor has a rated voltage range of 12 volts AC to 120 volts AC. Additionally, this device has a coil voltage of 120 volts AC. This Allen Bradley device meets the standards of CCC, CE, KC, and UL and, thus, is certified with all four.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 599-K04 is a part of the Allen Bradley Surge Suppressor 500 line of contactors and starters. A surge suppressor is also called a spike suppressor or a surge protector. It is essentially a box type device that is attached to an alternating current utility line or a telephone line to protect the electronic components from unexpected voltage spikes, also known as transients. To be more precise, we can say that the device prevents transients and is a transient suppressor. These spikes, or transients, can cause permanent equipment damage. Typically, a surge protector is a small box with several utility outlets, a power switch, and a 3-wire cord for plugging into a wall outlet. According to the National Electrical Manufacturers Association (NEMA) that sets the standards for electrical products, the 599-K04 ranges from size 0 to 5 on the NEMA size scale. This means the surge suppressor can range somewhere between 0 and 0.5 square inches. The rated voltage range of this surge protector is between 12 volts AC (alternating current) to 120 volts AC (alternating current). This surge suppressor comes with a Bulletin 500, Bulletin 500F and Bulletin 509 Open Line Modular Kits. This surge suppressor can be bought separately, and it also comes with modular kits. Typically, a kit consists of a 120 volts AC coil, an auxiliary contact, and a terminal shield (load side). This transient suppressor mounts right on top of the coil. Some certificates and standards, such as CCC, CE, KC, and UL, are given to the Allen Bradley 599-K04.
Question: Does Automation Stop offer repairs on the 599-K04?
Answer: Yes. We offer repairs for the 599-K04 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 599-K04?
Answer: If you buy the 599-K04 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 599-K04 online?
Answer: Yes. Automation Stop sells the 599-K04 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 599-K04?
Answer: The 599-K04 is made by Allen Bradley - Miscellaneous.
Question: What voltage does the 599-K04 have?
Answer: The Allen Bradley - Miscellaneous 599-K04 includes a voltage of 12-120.
For additional information about 599-K04 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 599-K04.
Revision Part # | Also Known As | Availability |
---|---|---|
599-K04/A | 599-K04 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.