The 5069-IB16 is a CompactLogix 16-Point I/O module that is branded and manufactured by Allen-Bradley and Rockwell Automation. Allen-Bradley and Rockwell Automation’s 5069-IB16 is an open-style device, meaning that it has no enclosure. The power dissipation of the 5069-IB16 lies at 3.9 Watts and the input voltage ranges from 10 Volts to 32 Volts DC. The 5069-IB16 5069 I/O module belongs to the Series A of controllers by Allen-Bradley and Rockwell Automation. The alternate part numbers for this I/O module are 5069-IB16/A, Series A, and Rev A. The dimensions of the I/O module are 138-144 x 22-25 x 105-109 millimeters.

The total number of digital inputs are 16 (one group of 16 points). The module has no digital output. The thermal dissipation of the module lies at 13.3 British Thermal Units (BTU) per hour. The single change delay time ranges about 10 milliseconds. The maximum frequency rating limits to 500 Hertz. The input voltage type is a DC plug-in connection. The allowed input voltage ranges from 12 to 24 Volts and the operating temperature range for this I/O module lies between zero (0) and 60 degree Celsius. The storage temperature ranges from -40 to 85 degrees Celsius. The off-state current lies at 1.5 milliamperes. This 5069-IB16 utilizes LED indicators for updating the status of the module (1 green or red) and updating the I/O status (16 yellow or red). Additional features include its small form factor, shareable output status among Logix 5000 controllers, high performance control, overvoltage protection of 36 Volts, and DIN rail mounting. The 5069-IB16 also offers reverse polarity protection.

The 5069-IB16 is a 24 Volt module by Allen-Bradley. It is a discrete input module and is included in the Compact 5000 I/O series. This module offers up to 16 sinking input channels and has an operating voltage range between 10 Volts and 32 Volts DC. It serves to integrate signaling equipment with Programmable Automation Controllers (PACs). This module can function either as a Distributed I/O module or as a local module connected to a CompactLogix controller. The minimum on-state current rating is 4 milliamperes at 10 Volts. The maximum on-state current is 7.4 milliamperes at 32 Volts DC. The nominal current rating is 6 milliamperes at 24 Volts DC. The MOD power inrush current limit is 75 milliamperes and the power dissipation rating is 3.9 Watts. The thermal dissipation limit is 13.3 BTU per hour. An external power supply is recommended for SA power and MOD power. The 5069-IB16 is mounted using a DIN rail and features integrated latches to ensure a secure connection and alignment with adjacent modules. A Removable Terminal Block (RTB) is required for input signal wiring. Compatible RTB models are the 5069-RTB18-SCREW and the 5069-RTB18-SPRING units. A solid or shielded copper wire that has insulation rated for 105 degrees Celsius (221 degrees Fahrenheit) may be used. The recommended size of the wire is 0.5 to 1.5 mm2 (22-16 AWG) and the maximum wire diameter including the insulation should not be more than 2.9 millimeters (0.11 inches) when the spring RTB is used. The max wire diameter limit is 3.5 millimeters (0.14 inches) for use with the screw RTB.