GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 500F-EOD930 |
Series: | 500F |
Description:
Designed and produced by Allen Bradley / Rockwell Automation, part number 500F-EOD930 is a NEMA contactor. This product may be housed within a NEMA rated, open-type enclosure. This contactor has a 120 volts alternating current (AC) coil. This contactor is equipped with one (1) normally open (NO) auxiliary contact. This device has a current rating of 135 amperes when operated continuously. The 500F-EOD930 has three (3) power poles. This device supports field swap out.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen Bradley 500F-EOD930 can be used with both a 3-phase motor voltage and a 1-phase motor voltage. With a 1-phase motor voltage, this module can operate within a voltage range of 115 to 230 volts. On the other hand, for a 3-phase motor voltage the horsepower rating is 75 Hp at a voltage range of 380 to 415 volts, 40 Hp at 200 volts, 50 Hp at 230 volts, and 100 Hp at a voltage range of 460 to 575 volts. As default, the base connector on the 500F-EOD930 features a contactor coil rated at 120 volts alternating current (AC). It also supports field swap out. For this purpose, the package comes with a secondary coil with the modular kit.
The Allen Bradley 500F-EOD930 can be connected with multiple auxiliary contacts. You can use a maximum of six (6) independent auxiliary contacts with this alternating current contactor. It must be placed inside an open-type enclosure. For both single- or three-phase applications, this module can be field wired. For quick shipment, this module is available as a modular kit. However, users have two ordering options. They can either order individual components or order the entire kit. By default, it comes with a normally open (NO) auxiliary contact.
The Allen Bradley 500F-EOD930 comes with several industry compliant certifications, which include the UL, CSA, IEEE, EN/IEC, CSQ, and CE. The modular kit gives the user a variety of customization options such as a selectable base contactor and a selectable coil voltage. It also comes with a surge compressor component.
Question: Does Automation Stop offer repairs on the 500F-EOD930?
Answer: Yes. We offer repairs for the 500F-EOD930 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 500F-EOD930?
Answer: If you buy the 500F-EOD930 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 500F-EOD930 online?
Answer: Yes. Automation Stop sells the 500F-EOD930 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 500F-EOD930?
Answer: The 500F-EOD930 is made by Allen Bradley - Miscellaneous.
For additional information about 500F-EOD930 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 500F-EOD930.
Revision Part # | Also Known As | Availability |
---|---|---|
500F-EOD930/A | 500F-EOD930 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.