GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 500F-DOD930 |
Series: | 500F |
Description:
The 500F-DOD930 is a feed through contactor from the 500 product family of the motor load starters. It is a product of Allen Bradley, assembled by Rockwell Automation. This contactor operates on the 110 to 120V input voltage class and is three-phase, while its current rating is 90 amperes and can draw 50 HP output power. It is also a NEMA size three contactor and is UL and CE approved.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 500F-DOD930 is a NEMA size 3 contactor feed through the starter. It is a product by Allen Bradley Rockwell Automation. It is a NEMA size three contactor that belongs to the 500 Bulletin. And the operating voltage of this starter is 600VAC and is a three-phase module. At the same time, its amperage rating is 90 amperes. As far as the applicability of this contactor is concerned, it is used for motor loads. In particular, this contactor could switch AC motor loads if overloading protection is not needed or is available separately.
Furthermore, it is compatible with remote control pilot devices like pushbuttons, selector switches, timers, relays, and temperature switches. The module has three poles and a control voltage class of 120VAC at 60 Hz of the frequency range. It has a 50 horsepower output power. The 500F bulletin modules also have NEMA, EEMAC ICS2 enclosures used especially for the industrial controls and systems. Similarly, the UL, CSA, ABS, USCG, and IEEE certifications have also approved this contactor. For wiring convenience, all power connections are located at the top of the contactor. So that the contractor can be field wired for single-phase or three-phase applications.
On the contrary, it's worth mentioning that the manufacturers are currently discontinuing this part number. It can, however, be used as a substitute for the prior models used by consumers. It is also critical that users follow the manufacturer's directions for the operation and configuration of this product to avoid any damage to the device and ensure the safety of the site's personnel.
Type | Contactor |
Question: Does Automation Stop offer repairs on the 500F-DOD930?
Answer: Yes. We offer repairs for the 500F-DOD930 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 500F-DOD930?
Answer: If you buy the 500F-DOD930 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 500F-DOD930 online?
Answer: Yes. Automation Stop sells the 500F-DOD930 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 500F-DOD930?
Answer: The 500F-DOD930 is made by Allen Bradley - Miscellaneous.
For additional information about 500F-DOD930 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 500F-DOD930.
Revision Part # | Also Known As | Availability |
---|---|---|
500F-DOD930/A | 500F-DOD930 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.