GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 440R-EM4R2 |
Series: | 440R |
UPC: | 10885630102228 |
Description:
The 440R-EM4R2 is a Guardmaster safety relay expansion module. This device has a 24 volt DC power supply with an average power consumption rating of 2 to 3.5 watts. This device is equipped with one rotary switch that is used to set the required function of the relay. The response time of the safety outputs is 35 milliseconds while the response time for the equipped single wire safety options is 25 milliseconds. The 440R-EM4R2 has an approximate weight of 0.225 kilograms,
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number 440R-EM4R2 is a Guardmaster safety relay expansion module that was manufactured by Allen-Bradley. This device belongs to the family of Bulletin 440R-Guardmaster safety relays. It is designed on the safety standards of EN ISO 12100, EN ISO 13849-1, EC 60204-1, and IEC 61508. As an expansion module, it expands on the main relay module to make the system, relay, and expansion easier to install and use. This device is equipped with a single rotary switch that is used to set the required function of the device. The rotary dial has selectable options which include reset, diagnostics, timing, and simple logic. The expansion module also has a single-wire safety connection that can simplify cascading and expanding safety functions via a single-wire connection to connect or link the relays.
The specifications for the power supply are twenty-four (24) volts direct current (DC) with an average power consumption of between two (2) to three-point-five (3.5) watts. The mechanical life of the expansion module is about 10,000,000 operations. The single wire safety connection serves as a safety input, whereas the safety output consists of four (4) Normally Open (N.O.) outputs. It also has a single immediate auxiliary output. The delay for the power ON time is five-point-five (5.5) seconds. The response time for safety outputs is thirty-five (35) milliseconds, whereas the response time for single wire safety options is twenty-five (25) milliseconds. The reset types for the module are configured manual, configured automatic, and monitored manually. The recovery time after a single operation is one hundred and fifty (150) milliseconds. The expansion module weighs 0.225 kilograms.
Question: Does Automation Stop offer repairs on the 440R-EM4R2?
Answer: Yes. We offer repairs for the 440R-EM4R2 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 440R-EM4R2?
Answer: If you buy the 440R-EM4R2 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 440R-EM4R2 online?
Answer: Yes. Automation Stop sells the 440R-EM4R2 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 440R-EM4R2?
Answer: The 440R-EM4R2 is made by Allen Bradley - Miscellaneous.
For additional information about 440R-EM4R2 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 440R-EM4R2.
Revision Part # | Also Known As | Availability |
---|---|---|
440R-EM4R2/A | 440R-EM4R2 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.