GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 42SRP-6022-QD |
Series: | 42SRP |
Description:
Part number 42SRP-6022-QD, which was designed and produced by Allen Bradley, is a Series 6000 photoelectric sensor. This device has a voltage range of 10 to 30 volts DC. The rated current consumption of this sensor is 35 milliamperes maximum. Its housing is made of Noryl and its lens is made of Acrylic. The output types for this device are both NPN and PNP for DC voltages and MOSFET for AC/DC voltages. This sensor has an operating temperature range of -40 to +56 degrees Celsius.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 42SRP-6022-QD is a Series 6000 photoelectric sensor. This device was designed and manufactured by Allen Bradley / Rockwell Automation. This photoelectric sensor has a voltage range of 10 to 30 volts DC. It has a 4-pin Micro QD connector. The diffuse mode is fixed focus, and the output type is both NPN and PNP for DC voltages and MOSFET for AC/DC voltages. With a reaction time of 1 millisecond, the maximum sensing range is 28 mm (1.1 inches). It features a mild operation mode. It has an infrared sensor beam. This sensor is a cuboid, 1-way system, small sensor. This sensor is derived from the Series 6000 photoelectric detectors, which provide dependable general-purpose sensing in a small size. Each sensor in the Series 6000 has a single red output indication. A red power indicator is seen on the transmitted beam light source. Each sensor features a four-turn adjustment potentiometer that is clutch-protected. For the Series 6000, a special Swivel/Tilt mounting bracket is offered. This bracket enables the sensor to be tilted 10 degrees in either direction or swiveled 360 degrees. There are also three alternative right-angle steel mounting brackets available. It has a vibration range of 10 to 55 hertz and an amplitude of 1 mm. This device can withstand a shock rated up to 30 g with a 1 millisecond pulse duration. This sensor has an operating temperature that should remain within a range of -40 degrees Celsius to +56 degrees Celsius, or -40 degrees Fahrenheit to +150 degrees Fahrenheit. The relative humidity rating for this sensor is 95% maximum.
Question: Does Automation Stop offer repairs on the 42SRP-6022-QD?
Answer: Yes. We offer repairs for the 42SRP-6022-QD and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 42SRP-6022-QD?
Answer: If you buy the 42SRP-6022-QD through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 42SRP-6022-QD online?
Answer: Yes. Automation Stop sells the 42SRP-6022-QD online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 42SRP-6022-QD?
Answer: The 42SRP-6022-QD is made by Allen Bradley - Miscellaneous.
Question: What voltage is included with the 42SRP-6022-QD?
Answer: The 42SRP-6022-QD by Allen Bradley - Miscellaneous has a voltage of 10-30.
For additional information about 42SRP-6022-QD check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 42SRP-6022-QD.
Revision Part # | Also Known As | Availability |
---|---|---|
42SRP-6022-QD/A | 42SRP-6022-QD Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.