GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 194E-GA16E-P11 |
Series: | 194E |
Description:
Designed and manufactured by the company known as Allen Bradley / Rockwell Automation, product number 194E-GA16E-P11 is an IEC load switch. This device has an UL Type 3/4/12 rated enclosure with an Ingress Protection rating of IP66. This IEC load switch has 1 normally open and 1 normally closed auxiliary contacts. This device is a three-pole switch. The ambient operating temperature for this device should range from -25 to +60 degrees Celsius.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number 194E-GA16E-P11 is an IEC load switch. This device was designed and manufactured by Allen Bradley / Rockwell Automation. This load switch belongs to the Bulletin 194E series of products. It is equipped with an enclosure with a rating of UL Type 3/4/12 and an Ingress Protection rating of IP66. This enclosure is made from painted steel and is hinged. It has physical dimensions measuring 6 inches x 6 inches x 4 inches. This enclosure was designed to be used for switches that have a 16 to 32 amperes current rating with three (3) poles. The load size of the Allen Bradley 194E-GA16E-P11 IEC load switch is sixteen (16) amperes. This device has a handle that is colored red and/or yellow. Additionally, this load switch has a contact configuration consisting of one (1) normally open (NO) auxiliary contact, as well as one (1) normally closed (NC) auxiliary contact. This is a three (3)-pole switch. The Allen Bradley 194E-GA16E-P11 must be mounted on the left-hand side. This IEC load switch is equipped with IP2LX Finger-Safe Terminals built into it. This device is also equipped with the Positive-Guided Actuation feature. The mechanical life of this device is estimated to be 0.2 million operations. Bulletin 194E devices has an ambient operating temperature that should range from -25 degrees Celsius to +60 degrees Celsius, or the equivalent range of -13 degrees Fahrenheit to +140 degrees Fahrenheit. When storing these devices, the temperature of the surrounding area should range from -40 degrees Celsius to +80 degrees Celsius, or -40 degrees Fahrenheit to +176 degrees Fahrenheit.
Question: Does Automation Stop offer repairs on the 194E-GA16E-P11?
Answer: Yes. We offer repairs for the 194E-GA16E-P11 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 194E-GA16E-P11?
Answer: If you buy the 194E-GA16E-P11 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 194E-GA16E-P11 online?
Answer: Yes. Automation Stop sells the 194E-GA16E-P11 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 194E-GA16E-P11?
Answer: The 194E-GA16E-P11 is made by Allen Bradley - Miscellaneous.
Question: What amperage does the 194E-GA16E-P11 have?
Answer: The 194E-GA16E-P11 has a amperage of 16.
For additional information about 194E-GA16E-P11 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 194E-GA16E-P11.
Revision Part # | Also Known As | Availability |
---|---|---|
194E-GA16E-P11/A | 194E-GA16E-P11 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.