GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 193-EA1DB |
Series: | 193 |
UPC: | 10662072619015 |
Description:
Allen Bradley?s 193-EA1DB is a Bulletin 193 electronic motor protection relay manual reset device for 3-phase applications. This Bulletin 193 relay has a wide adjustment range of 1 to 2.9 amperes. This device is self-powered, provides phase loss protection, has 1 normally closed (NC) and 1 normally open (NO) auxiliary contact, and has a low energy consumption of 150 milliwatts. This device is capable of being mounted via a DIN rail or a panel mount.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number 193-EA1DB is a self-powered electronic relay that was designed and manufactured by Allen Bradley / Rockwell Automation for motor protection. With a wide adjustable current range, this device mounts to 100-M05 to 100-M09 and 100C09 to 100-C23 contactors. This electronic relay is designed for 3-phase applications and comes fitted with labeling material for contactors and protection devices. This Bulletin 193-EA motor protection relay has an insulated rated voltage of 690 volts, a rated impulse strength of 6 kilovolts, as well as an operating voltage of 690 volts. Additionally, its control circuit has an equivalent rated insulation voltage of 600 volts, a rated impulse strength of 6 volts, as well as a rated operating voltage of 600 volts. This device has a rated operating make current of 3 amperes at 12 volts AC, 1.5 amperes at 120 volts AC, 0.75 amperes at 220 to 240 volts AC, and 0.6 amperes at 500 to 600 volts AC. Additionally, it has a corresponding operating break current of 2 amperes at 12 volts AC, 1.5 amperes at 120 volts AC, 0.75 amperes at 220 to 240 volts AC, and 0.6 amperes at 380 to 480 and 500 to 600 volts AC.
The Allen Bradley 193-EA1DB is fitted with M4 terminal screws, supports AWG 14 to 8 cables, has a recommended torque of 1.8 Newton-meters, as well as a conventional thermal current of 5 amperes. Furthermore, this protection device’s control circuit supports M3.5 terminal screws, AWG 18 to 12 cables, has a recommended torque of 1.4 Newton-meters, and operates at an ambient temperature of -20 to +60 degrees Celsius.
Question: Does Automation Stop offer repairs on the 193-EA1DB?
Answer: Yes. We offer repairs for the 193-EA1DB and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 193-EA1DB?
Answer: If you buy the 193-EA1DB through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 193-EA1DB online?
Answer: Yes. Automation Stop sells the 193-EA1DB online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 193-EA1DB?
Answer: The 193-EA1DB is made by Allen Bradley - Miscellaneous.
Question: What amperage is included with the 193-EA1DB?
Answer: The 193-EA1DB by Allen Bradley - Miscellaneous has a amperage of 1.0-2.9.
For additional information about 193-EA1DB check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 193-EA1DB.
Revision Part # | Also Known As | Availability |
---|---|---|
193-EA1DB/A | 193-EA1DB Ser A, Series A, Rev A | Request a Quote |
193-EA1DB/B | 193-EA1DB Ser B, Series B, Rev B | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.