GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 156-A20BB3 |
Series: | 156 |
Description:
156-A20BB3 is a solid-state contactor by Allen Bradley. It is a three-phase alternating current device. It comes with an operating voltage range of 24 to 480 Volts AC at 50/60 Hz. It can handle 20 amperes of current. Its control voltage ranges from 5 to 24 volts DC. It has an LED status indicator, IP20 protection, and DIN rails for mounting. It complies with IEC 60947-4-2 and IEC 60947-4-3 standards.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Allen Bradley 156-A20BB3 is a bulletin156 solid-state contactor. It is specifically devised for fast loads, including motors, heaters, transformers, and solenoids. It has a compact modular design, which is completed by the heat sink. It can be installed easily and fast. It has a mountable DIN Rail. It offers specifications that comply with industry standards. It offers IP 20 protection. This contactor is of type burst fire to help reduce EMC emissions. For status indication, it includes LEDs.
It is a three-phase contactor with an operational rated voltage of 20 amperes. For heater loads (AC-1/ AC-51), the max operating current is 20 amperes. For motor loads (AC-3/ AC-53A), the maximum operating current is 10 amperes and leakage current of 1 milliampere. Its operational voltage is 24 Volts AC to 480 Volts AC at the operating frequency of 50/60 Hz. Its control circuit has a control voltage range of 5 to 24 Volts DC ±10% with a maximum pick-up voltage of 4.25 Volts DC and minimum drop-out voltage of 1.5 Volts DC. This control circuitry is rated at a control current of 15 milliamperes at 24 Volts DC and response time of 1/2 cycle.
Its housing material is Self-extinguishing PPO UL94V1. The heat sink fitted in this contactor is made of aluminum black anodized. The contactor's base is of electroplated steel. It gets cool through natural convection. It is mounted vertically as horizontal alignment reduces its efficiency. Its insulation has a rated voltage of 660 Volts AC and 4 kV of impulse withstand voltage.
Question: Does Automation Stop offer repairs on the 156-A20BB3?
Answer: Yes. We offer repairs for the 156-A20BB3 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 156-A20BB3?
Answer: If you buy the 156-A20BB3 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 156-A20BB3 online?
Answer: Yes. Automation Stop sells the 156-A20BB3 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 156-A20BB3?
Answer: The 156-A20BB3 is made by Allen Bradley - Miscellaneous.
For additional information about 156-A20BB3 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 156-A20BB3.
Revision Part # | Also Known As | Availability |
---|---|---|
156-A20BB3/A | 156-A20BB3 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.