Allen-Bradley 150-C9NBD

The 150-C9NBD is a solid-state, SMC-3 smart motor controller with Delta compatibility and an open-type enclosure, designed by Allen-Bradley. This is a 3-phase controller which can be used for applications including fans, lifts, compressors, mixers, chillers, pumps, conveyors, and more. This controller’s horsepower rating depends on the voltage and starting duty. If operating at a starting duty of 350%, the 150-C9NBD has 0.75 Horsepower to 2 Horsepower, 200 Volts or 230 Volts Alternating Current. In the same duty cycle, this controller has 1.5 Horsepower to 5 Horsepower at 460 Volts Alternating Current. At a starting duty of 450% the power rating ranges from 0.75 Horsepower to 1.5 Horsepower at 200 Volts Alternating Current or 0.75 to 2 Horsepower at 230 Volts Alternating Current, up to 1.5 to 3 Horsepower at 460 Volts Alternating Current. The Allen-Bradley 150-C9NBD SMC-3 Smart Motor Controller’s current ranges from 3 amperes to 9 amperes. It also features an impact voltage of 100 to 240 Volts AC and an input line voltage of 200 to 480 Volts AC, 50/60 Hertz.

This Allen-Bradley 150-C9NBD SMC-3 Smart Motor Controller includes a range of protective systems and features. These include electronic motor overload protection, phase reversal protection, phase imbalance, phase loss/open load, and over-temperature protection. This smart motor controller offers five different modes of operation, particularly kick start, coast-to-rest, soft start, soft stop, and current limit start. Also present is an LED status indicator that shows its fault, OFF, and RUN status. Note that the fault type is identified according to the number of distinct flashes demonstrated by the LED indicator. The push also acts a hold-to-test button to identify faults of the controller.