GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 150-C201NBR |
Series: | SMC-3 |
Description:
The Allen-Bradley 150-C201NBR is a smart motor controller. This product was designed to be a part of the SMC-3 series of Allen-Bradley products. This device has an open-type enclosure. It has a control voltage of 24 volts AC/DC, as well as a line voltage of 200 to 460 volts AC. This device has a maximum operating frequency of 50 to 60 hertz. Additionally, the 150-C201NBR has a maximum operating horsepower of 40 to 60 horsepower (Hp) at a 60 hertz frequency.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number 150-C201NBR is a solid-state smart motor controller designed by Allen-Bradley. This device is a part of the SMC-3 product line, and it comes with 3-wire controllers. Its control voltage and line voltage are 24 volts AC/DC and 200 to 460 volts AC, respectively. Its maximum operating frequency and maximum operating horsepower are 50 to 60 hertz and 40 to 60 horsepower at 60 hertz, respectively. Just like any other standard SMC-3, the Allen-Bradley 150-C201NBR comes with an open-type enclosure, and Delta Compatibility. Users can use this Smart Motor Controller with any standard 3-Phase motors. The Allen-Bradley 150-C201NBR has numerous applications that it is compatible with. These applications include, but are not limited to, pumps, fans, lifts, conveyors, and crushers. When it comes to operation, the Allen-Bradley 150-C201NBR comes with 5 modes of operation, which include coast-to-rest, soft start, soft stop, current limit start, and kick start. The Allen-Bradley 150-C201NBR comes with many protections control measures that protect the SMC from numerous things, including phase reversal and over-temperature, just to name a couple. During the starting up process, the Allen-Bradley 150-C201NBR will conduct a self-assessment. If it detects a shorted SCR, it will indicate that via the LED indicator. This way, the Allen-Bradley 150-C201NBR can avoid any major phase imbalance. This device will display a fault using the LED indicator if it detects a phase imbalance that exceeded fifty percent of the current imbalance for three full seconds. If it detects a single-phase condition, this SMC will abort startup. This measure is built-in to protect the connected motors from burning out.
MPN | 150-C201NBR |
Manufacturer | Allen Bradley / Rockwell Automation |
Series | SMC-3 Controller |
Controller Type | SMC-3 |
Amps | 201 A |
Enclosure Type | Open |
Input Line Voltage | 200...460V AC, 3-Phase, 50/60 Hz |
Voltage | 24V AC/DC |
Question: Does Automation Stop offer repairs on the 150-C201NBR?
Answer: Yes. We offer repairs for the 150-C201NBR and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 150-C201NBR?
Answer: If you buy the 150-C201NBR through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 150-C201NBR online?
Answer: Yes. Automation Stop sells the 150-C201NBR online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 150-C201NBR?
Answer: The 150-C201NBR is made by Allen Bradley - Miscellaneous.
Question: What type of product is the 150-C201NBR?
Answer: The 150-C201NBR is part of the SMC-3 series.
Question: What amperes does the 150-C201NBR have?
Answer: The Allen Bradley 150-C201NBR has a amperes of 201 A.
Question: What is the Controller Type of the 150-C201NBR?
Answer: The Controller Type of the 150-C201NBR is SMC-3.
Question: What Enclosure Type is included with the Rockwell-Automation 150-C201NBR?
Answer: The 150-C201NBR has a Open Enclosure Type.
Question: What is the Input Line Voltage of the 150-C201NBR?
Answer: The Input Line Voltage of the Rockwell Automation 150-C201NBR is 200...460 volts AC (alternating current), 3-Phase, 50/60 Hz.
Question: What Voltage does the 150-C201NBR have?
Answer: The Allen Bradley 150-C201NBR has a Voltage of 24 volts alternating current (AC)/direct current (DC).
For additional information about 150-C201NBR check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 150-C201NBR.
Revision Part # | Also Known As | Availability |
---|---|---|
150-C201NBR/A | 150-C201NBR Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.