GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 140-MN-1000 |
Series: | 140 |
Description:
The 140-MN-1000 is a manual motor starter that is operated at 25 amperes. This device was manufactured by Allen-Bradley. It belongs the D series and requires 1 AAA battery to operate it. The rated horsepower of this motor starter is 20 Hp. The weight of this product is about 2 pounds, and the volume of this accessory motor starter switch is about 1 cubic centimeter. The physical dimensions of this device measure 8 inches x 8 inches x 8 inches.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number 140-MN-1000, which was designed by Allen-Bradley and even manufactured by them, is a manual motor starter and is used as an accessory for other Allen-Bradley products. This motor starter belongs to the Bulletin 140 series of products. This manually controlled motor starter switch is equipped with three (3) poles. This product belongs to the D series. It has a rated operating current of 25 amperes. Its current adjustment rating value is 6.3 amperes to 10 amperes. One (1) triple A, or AAA, sized battery is required to power this motor starter. The AAA battery is a standard size of dry cell battery. The horsepower rating of this device is twenty (20) Hp. Motor starters are equipment that use manual or automatic switches to start and stop electric motors while also providing overload protection to the motor circuits. Wherever electrical applications with more than a certain horsepower are employed, motor starters are used. Mechanical motor regulators are electrical devices that are being used to operate motors and often contain features such as motor disconnect, overload protection, short-circuit protection, and automation all in one unit. Power system protection functions are included in combination motor controllers, which eliminate the need for additional fuses or breakers. The physical dimensions of this motor starter measure 8 inches x 8 inches x 8 inches (height x width x depth). Additionally, this device weighs approximately two (2) pounds. The volume of this motor starter is approximately one (1) cubic centimeter (cm³). This device has been discontinued as of 2014.
Question: Does Automation Stop offer repairs on the 140-MN-1000?
Answer: Yes. We offer repairs for the 140-MN-1000 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 140-MN-1000?
Answer: If you buy the 140-MN-1000 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 140-MN-1000 online?
Answer: Yes. Automation Stop sells the 140-MN-1000 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 140-MN-1000?
Answer: The 140-MN-1000 is made by Allen Bradley - Miscellaneous.
Question: What amperage is included with the 140-MN-1000?
Answer: The 140-MN-1000 by Allen Bradley - Miscellaneous has a amperage of 6.3-10.
For additional information about 140-MN-1000 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 140-MN-1000.
Revision Part # | Also Known As | Availability |
---|---|---|
140-MN-1000/A | 140-MN-1000 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.