GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 140-A11 |
Series: | 140 |
Description:
The Allen-Bradley 140-A11 is an auxiliary contact device for the Bulletin 140-MN contactors. This auxiliary contact is primarily used for swapping current flow of no more than 10 amperes. This auxiliary contact includes timer relays and protection relays, among other features. The Allen-Bradley 140-A11 auxiliary contact device for 140-MN supports 2-poles has one normally open and normally closed contact, according to the manufacturer's requirements. Because it is utilized for command, signaling, alert, and feedback (circuit), this auxiliary contact may also be termed as a helping contact.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley 140-A11 is an auxiliary contact device for the Bulletin 140-MN contacts. This auxiliary contact is primarily used for swapping current flow of no more than 10 amperes. This auxiliary contact includes timer relays and protection relays, among other features. This Allen-Bradly auxiliary contact device is a standard (limited-power) relay that is constructed as a "regular" auxiliary contact device and, therefore, is termed an auxiliary contactor when utilized in conjunction with another contactor. To specify the fact that it is not used for swapping loads, but rather for activation / deactivation or used to either integrate or disintegrate a circuit. In short, to regulate load contacts. As a result, this auxiliary contact device has no primary contacts and just has auxiliary connections. The Allen-Bradley 140-A11 auxiliary contact device for 140-MN supports 2-poles and has one normally open (N.O.) and one normally closed (N.C.) contact, thus fulfilling basic requirements of the manufacturer. Due to it being utilized for command, signaling, alert, and feedback (circuit), this auxiliary contact may also be termed as a helping contact.
Furthermore, the Allen-Bradley 140-A11 contactor is mounted externally, with a spacing of 54 millimeters. This device weighs approximately 4.8 ounces. Being a circuit breaker, Bulletin 140 complies with IEC/EN 60947-2. This component doesn't fulfill the UL and CSA criteria for circuit breakers. Bulletin 140 is a manually operated motor controller, and it is UL classified (UL508) & CSA approved for group motor installation. All installments, configurations, and servicing must be performed by qualified individuals who are familiar with local standards.
Question: Does Automation Stop offer repairs on the 140-A11?
Answer: Yes. We offer repairs for the 140-A11 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 140-A11?
Answer: If you buy the 140-A11 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 140-A11 online?
Answer: Yes. Automation Stop sells the 140-A11 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 140-A11?
Answer: The 140-A11 is made by Allen Bradley - Miscellaneous.
For additional information about 140-A11 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 140-A11.
Revision Part # | Also Known As | Availability |
---|---|---|
140-A11/A | 140-A11 Ser A, Series A, Rev A | Request a Quote |
140-A11/B | 140-A11 Ser B, Series B, Rev B | Request a Quote |
140-A11/C | 140-A11 Ser C, Series C, Rev C | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.