GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 100S-C09DJ404C |
Series: | 100S |
Description:
The 100S-C09DJ404C is a Series A non-reversing safety contactor manufactured by Allen-Bradley. This safety contactor can be used for implementing safety functions to the circuits.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 100S-C09DJ404C is a Series A 24-Volt non-reversing safety contactor that is branded and manufactured by Allen-Bradley and Rockwell Automation. The 100S-C09DJ404C non-reversing safety contactor is used to implement safety functions to the electrical circuits of the module. The contactor module is an electrical switching device that is used to switch electrical circuits on and off. A contactor is a type of relay with a basic difference. The safety contactor is used in applications where high current carrying capacity is required, whereas relays are used for applications with lower current carrying capacity. The contractor has normally open contacts and they provide operating power to the load when the 100S-C09DJ404C contactor coil is powered. Basically, the contactors are used with electric motors. Features and benefits for the 100S-C09DJ404C include direct-on-line and reversing contactors, built-in surge suppression with electronic coils, AC and DC coil control, complete range of accessories within each contactor family, compatibility with Bulletin 193 and 140M devices, RoHS compliance, support of IE3 motor switching, and safety contactors.
The 100S-C09DJ404C Series A 24-Volt non-reversing safety contactor can provide current carrying capacity of 9 Amperes at the voltage rating of 24 Volts DC. The 100S-C09DJ404C safety contactor is a non-reversing contactor with a maximum voltage capacity of 600 Volts. The safety contactor is designed for handling high voltage applications to prevent accidents. To prevent accidents in electrical circuits, the 100S-C09DJ404C contactor includes safety features like spring loaded contacts. This prevents internal short circuiting in case the contactor goes into the situation of overloading. To remove or reduce sparks forming in the circuit, the module includes Magnetic Arc Suppressor.
MPN | 100S-C09DJ404C |
Series | MCS-C Non-Reversing Safety Contactor |
Manufacturer | Allen Bradley |
Product Type | Compact Frame IEC Contactor |
Terminal Type | Standard |
Contactor Amperage | 9A |
Control Voltage | 24V DC |
Auxiliary Contacts | 0 N.O. 4 N.C. |
Main Poles | 4 N.O. 0 N.C. |
Options | With cross-stamped front-mount auxiliary contacts |
Question: Does Automation Stop offer repairs on the 100S-C09DJ404C?
Answer: Yes. We offer repairs for the 100S-C09DJ404C and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 100S-C09DJ404C?
Answer: If you buy the 100S-C09DJ404C through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 100S-C09DJ404C online?
Answer: Yes. Automation Stop sells the 100S-C09DJ404C online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 100S-C09DJ404C?
Answer: The 100S-C09DJ404C is made by Allen Bradley - Miscellaneous.
Question: What is the Auxiliary Contacts of the 100S-C09DJ404C?
Answer: The Auxiliary Contacts of the Allen Bradley 100S-C09DJ404C is 0 N.O. 4 N.C..
Question: What is the contactor unit Amperage of the 100S-C09DJ404C?
Answer: The Rockwell Automation 100S-C09DJ404C has a contactor component Amperage of 9A.
Question: What Control Voltage does the 100S-C09DJ404C have?
Answer: The 100S-C09DJ404C has a Control Voltage of 24 volts DC (direct current).
Question: What Main Poles does the 100S-C09DJ404C have?
Answer: The Allen Bradley-Rockwell Automation 100S-C09DJ404C has a Main Poles of 4 N.O. 0 N.C..
Question: What kind of Options does the 100S-C09DJ404C have?
Answer: The Allen Bradley-Rockwell Automation 100S-C09DJ404C includes With cross-stamped front-mount auxiliary contacts for its Options.
Question: What Product Type does the 100S-C09DJ404C have?
Answer: The Allen Bradley/Rockwell Automation 100S-C09DJ404C has a Compact Frame IEC contactor unit Product Type.
Question: What Terminal Type is included with the Allen Bradley/Rockwell Automation 100S-C09DJ404C?
Answer: The Allen Bradley/Rockwell Automation 100S-C09DJ404C has a Standard Terminal Type.
For additional information about 100S-C09DJ404C check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 100S-C09DJ404C.
Revision Part # | Also Known As | Availability |
---|---|---|
100S-C09DJ404C/A | 100S-C09DJ404C Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.