GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1783-MX08F |
Series: | 1783 |
Description:
Part number 1783-MX08F is a Stratix 8000 expansion module. Designed and produced by Allen Bradley / Rockwell Automation, this module has 8 ports. The power supply rating of this module is 24 to 48 volts DC. It has a heat dissipation rating of 10.1 watts, with an inrush current rated at 2 amperes. This module has a rated backplane power of 3.6 amperes maximum at 3.3 volts DC. This module is equipped with an open-style enclosure.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 1783-MX08F module, which is an expansion module belonging to the Stratix 8000 series, was designed and manufactured by Allen Bradley / Rockwell Automation. This Stratix 8000 module comes with eight (8) ports and has a power supply rating of twenty-four (24) to forty-eight (48) volts direct current (DC). The connector that is included in this Allen Bradley module is a 100 Base-F Fiber-Optic Ethernet Port. Aside from that, the power dissipation of the module is ten-point-one (10.1) watts, and the inrush current is two (2) amperes. The rated backplane power of this module is 3.6 amperes maximum at a voltage of 3.3 volts DC. In addition to that, the Allen Bradley 1783-MX08F expansion module, is equipped with an open-type enclosure and has CompactFlash memory. The operational vibration rating of this module is 2 G at a frequency range of 10 to 500 hertz. This device can withstand an operating shock rated up to 20 G, as well as a non-operating shock rated up to 30 G. The operating temperature for this Allen Bradley expansion module should remain within a range of -40 to +60 degrees Celsius, or the equivalent range of -40 to +140 degrees Fahrenheit. Additionally, the temperature of the air surrounding the 1783-MX08F expansion module should be a maximum of 60 degrees Celsius. The relative humidity rating of this device is 5% to 95% with no condensation. This expansion module by Allen Bradley has physical dimensions that measure 147 mm x 112 mm x 97 mm (height x length x width).
Question: Does Automation Stop offer repairs on the 1783-MX08F?
Answer: Yes. We offer repairs for the 1783-MX08F and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1783-MX08F?
Answer: If you buy the 1783-MX08F through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1783-MX08F online?
Answer: Yes. Automation Stop sells the 1783-MX08F online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1783-MX08F?
Answer: The 1783-MX08F is made by Allen Bradley - PLC.
For additional information about 1783-MX08F check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1783-MX08F.
Revision Part # | Also Known As | Availability |
---|---|---|
1783-MX08F/A | 1783-MX08F Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.