GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1783-BMS20CGN |
Series: | 1783 |
Description:
The 1783-BMS20CGN is a Stratix 5700 managed Ethernet switch. The module is manufactured by Allen-Bradley. This switch has 16 RJ45 ports, two combo ports, and two fiber ports. The 1783-BMS20CGN requires an input power of 12-48 volts DC. This switch has a maximum power consumption rating of 30 watts and a maximum power dissipation rating of 30 watts. The Allen-Bradley 1783-BMS20CGN is rated for open-type enclosures and weighs approximately 2.04 kg.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
This 1783-BMS20CGN is an industrial-grade managed Ethernet switch and it is manufactured by Allen Bradley. This switch is part of the Allen-Bradley Stratix 5700 series of industrial switches. This switch is available with 20 network ports available. When mounting the 1783-BMS20CGN, operators should ensure that a clearance of 2 inches is left on all sides of the switch to aid proper airflow around the device to avoid overheating. For better performance of the switch, the air temperature around the switch should not exceed 60 degrees Celsius (140 degrees Fahrenheit). The length of cables should not exceed 100 meters for 10/100 and 10/100/1000 ports. This Allen-Bradley Switch connected with the Ethernet cables should be kept out of areas with electrical noise, such as power lines and radios. To ensure better noise immunity, shielded Ethernet cables should be used on the RJ45 uplink ports for this Allen-Bradley switch. The input power required for this switch is 12-48 VDC, and the current is 0.5-3 amperes. This switch has a maximum power consumption rating of 30 W and a power dissipation (max.) rating of 30 W. This switch has an open enclosure, and the dimensions are 129.5 x 127 x 128.3 mm. The approximate weight of this Allen-Bradley switch is 2.04 kilograms. This switch has 16 RJ45 Ethernet ports, two Gigabit Ethernet combo ports, and two fiber Fast Ethernet ports. To increase the memory of this switch, the 1784-SD1 card from Allen-Bradley can be ordered separately and installed.
Question: Does Automation Stop offer repairs on the 1783-BMS20CGN?
Answer: Yes. We offer repairs for the 1783-BMS20CGN and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1783-BMS20CGN?
Answer: If you buy the 1783-BMS20CGN through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1783-BMS20CGN online?
Answer: Yes. Automation Stop sells the 1783-BMS20CGN online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1783-BMS20CGN?
Answer: The 1783-BMS20CGN is made by Allen Bradley - PLC.
For additional information about 1783-BMS20CGN check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1783-BMS20CGN.
Revision Part # | Also Known As | Availability |
---|---|---|
1783-BMS20CGN/A | 1783-BMS20CGN Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.